JVC LPT1016-001A, 0105KTH-MW-BJ manual 20 EN, Basic Playback

Page 20

20 EN

OPERATIONS ON VHS DECK

Basic Playback

●Turn on the TV and select the video channel (or AV mode).

●Slide the TV/VCR/DVD switch on the remote control to the right.

Slide to the right.

Clean the video heads using a dry cleaning cassette — ECL-3F — when:

●Rough, poor picture appears while a tape is played back.

●The picture is unclear or no picture appears.

●“USE CLEANING CASSETTE” appears on the screen (only with “O.S.D.” set to “ON”). ( pg. 54)

NOTE:

The heads get dirty in the following cases:

●in an environment prone to extreme temperature or humidity

●in a dusty environment

●flaw, dirt or mold on video tapes

●continuous usage for a long time

A Load a cassette.

Make sure the window side is up, the rear label side is facing you and the arrow on the front of the cassette is pointed toward the unit.

●Do not apply too much pressure when inserting.

●If the record safety tab has been removed, playback begins automatically. Although the DVD deck is selected, the VHS deck is selected automatically if the DVD deck is in stop mode.

●Select the appropriate colour system with “PAL/MESECAM“ and “NTSC“ in Function Set. ( pg. 54)

●The unit’s power comes on automatically and the counter is reset to 0:00:00.

B Select the VHS deck.

On the unit

Press VCR/DVD repeatedly so that the VCR indicator lights up.

On the remote control

Press VCR so that the VCR indicator lights up.

C Find the programme start point.

If the tape is advanced past the start point, press 3. To go forward, press 5.

D Start playback.

Press 4. “bESt” appears blinking on the front display panel during automatic tracking. ( pg. 25)

E Stop playback.

Press 8. Then press x on the VHS deck to remove the cassette.

Usable cassettes

● Compact VHS camcorder recordings can be played on this unit.

Simply place the recorded cassette

into a VHS Cassette

Adapter and it can be used just like any full-sized VHS cassette.

●This video recorder is equipped with SQPB (S-VHS QUASI PLAYBACK) that lets you watch tapes recorded in the S-VHS format and the SP mode with regular VHS resolution.

*SQPB does not deliver Super VHS resolution.

●This video recorder can record on regular VHS and Super VHS cassettes. However, it will record regular VHS signals only.

*S-VHS recording is not possible with this recorder.

Image 20

Contents HR-XV38SAG HR-XV38SAS Safety Precautions Use only discs marked with the followingContents About Discs Playable DiscsUnplayable Discs Region NumberFile Structure of Discs Placing a DiscCare and Handling of Discs Open the disc trayFront View Satellite Auto Recording Indicator N pg Tape Remaining Time Indicator pgON-SCREEN Display VHS deck Counter Display Tape Speed SP/LP or EP* pgHow To Use E Button rt Button Enter ButtonCheck the contents Basic ConnectionsSituate the unit Connect the unit to TVBack of TV Plug the end of the mains power cord into a mains outlet10 EN Scan Mode Set Switch the modeDVD deck Turn on the unit8To connect to a TV with S-VIDEO/AUDIO in connectors Back of TV Audio in connectors12 EN Video ConnectionAccess the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set Set the video channelAuto Set Up 14 ENSelect the mode Select the mode settingMonitor Set DVD deck Return to the normal screen16 EN LanguageSelect the mode Select the DVD deckLanguage Code List 18 ENTo make corrections anytime during the process Clock SetStart the clock operation 20 EN Basic PlaybackPlayback Features 22 EN Instant ReViewRepeat Playback Manual TrackingBasic Recording Recording Features Instant Timer Recording ITR24 EN Tape Remaining TimeRecording Receiving Stereo and Bilingual ProgrammesPlayback Guide Program Number Set System Setup26 EN Timer Programming Access the G-CODE/SHOWVIEWscreenAccess the G-CODEProgram screen Enter the G-CODEnumberEngage the unit’s timer mode To Timer-Record Weekly Or Daily Serials28 EN Guide Program Number SetExpress Timer Programming Disengage the timer mode Access the Programme Check screenCancel or change a programme Return to the timer modeWhen programmes overlap each other Cancel or change programme settingConfirm the overlapping programmes Select the programme to modifyRecording mode Input Connector Input L-1 connector32 EN Press pLoad the disc Pause playbackStart playback PressLocating a Desired Scene Using the DVD Menu Access the DVD menuAccess the PBC menu 34 ENLocating the Start Point of the Item or Skip the Item Zooming36 EN Access the menu Select the timeSelect the subtitle language If you have specified a wrong selectionSelect the audio setting 38 ENAngle Selection Select the view angleVFP function Adjusting the picture quality Sound Effect 3D PhonicHow to Access the On-Screen Bar Access the status barAccess the menu bar 40 ENMenu Bar Functions for SVCD/Video CD/Audio CD During playback, selects the audio language or sound trackDuring playback, selects the subtitle language During Video CD/SVCD playback, selects the audio channelsPrecautions 42 ENOutline Control displayBasic Playback Select the groupControl display appears on the TV screen. pg Press rt to select the desired group, then press eZooming a still picture 44 ENGroup/File Selection Set the unit’s input mode Set the edit modeEngage the Record Pause mode Make connectionsSet the input mode of recording deck Engage the Record Pause mode of the recording deck46 EN Start the source playerDubbing From DVD to VHS48 EN Place a disc and load an MDPrepare the audio device for dubbing For the digital audio deviceChange the remote control code Set the remote control codeTurn off the unit Display the codeOperate the TV 50 ENOperating a JVC TV Connecting To a Satellite Receiver Satellite receiver52 EN Make connectionsAccess the Mode Set screen Function Set VHS deckPress rt to move the highlight bar pointer to Function SET, then pressSubsidiary Settings 54 ENAuto Splp Timer on / OFF For Example56 EN Mode Set DVD deckAccess the DVD Set Up menu screen Set this item correctly according to the logo on the device Picture SettingsAudio Settings Others Settings 58 ENParental Lock Playback discsCountry/Area Code List for Parental Lock Access the Auto Channel Set screen 60 ENTuner Set Auto Channel SetManual Channel Set Swap Channel Position 62 ENDelete a Channel Perform tuning Select the channel to fine-tuneSelect the channel FRQ number for the channel starts blinkingSlide to the right You can disable the unit’s operation 64 ENChild Lock Set the Child LockInformation on Multi-System Compatibility VHS deck Off-Air RecordingTV System Recorded tape66 EN Tape-To-Tape EditingRecorded tape Playback equipment Recording circuitPower Tape Transport VHS deckPlayback VHS deck Playback DVD deckInput mode is not correct Set the input mode to L-1 or F-1 68 ENMP3/JPEG Files Playback DVD deck Recording VHS deckTimer Recording VHS deck Timer recording won’t workTUNER/TIMER VHS deck 70 ENVIDEO/AUDIO VHS deck VIDEO/AUDIO DVD deckAuto Channel Set Auto Set Up Connecting To a Dolby Digital Decoder or An AmplifierExpress Timer Programming CODE/SHOWVIEW System SetupHR-XV38SAG/HR-XV38SAS