Auto Set Up

SET UP ENTER SELECT WITH @ THEN PRESS [ENTER]

PRESS [SET UP] TO EXIT

RETURN

INITIAL SETTINGS EN 17

Auto Channel Set/Auto Clock Set/Auto Guide Programme Number Set

After the A button on the unit (or DVD A on the remote control) is pressed for the first time to turn on the unit, by simply selecting your country*, the Auto Set Up function sets the tuner channels, clock** and Guide Programme numbers automatically.

*If you live in Belgium (BELGIUM) or Switzerland (SUISSE), you also need to select your language.

*If you live in Hungary (MAGYARORSZÁG), Czech Republic (ČESKÁ REPUBLIKA), Poland (POLSKA) or other countries in Eastern Europe (OTHER EASTERN), set the clock manually.

3Press FGDE to select the language of your choice, then press ENTER. The AUTO SET/ T-V LINK display appears on the TV screen.

4Press DE to select AAUTO SETB, then press ENTER. The AUTO SET screen will appear.

●When AUTO SET is completed, ASCAN COMPLETEDB appears on the TV screen. After selecting AOKB, APLEASE WAIT...B appears on the screen while channel data is being transferred to the VHS deck. During this period (approximately 80 seconds), the VHS deck is not operable. It will exit the AUTO SET mode once APLEASE WAIT...B disappears from the screen.

INITIAL SET UP > LANGUAGE SELECT

ENGLISH

DEUTSCH

FRANCAIS

ITALIANO	ESPAÑOL	NEDERLANDS
SVENSKA	NORSK	SUOMI
DANSK

		RETURN
SET UP	ENTER SELECT WITH @ THEN PRESS [ENTER]
EXIT	PRESS [SET UP] TO EXIT
EXIT	SELECT
INITIAL SET UP > AUTO CH SET
	AUTO SET	T-V LINK

SET UP	ENTER	SELECT WITH @ THEN PRESS [ENTER]
		PRESS [SET UP] TO EXIT

EXITSELECT

INITIAL SET UP > AUTO SET

	AUTO SET
	PLEASE WAIT...
	CANCEL
SET UP	ENTER SELECT WITH @ THEN PRESS [ENTER]
EXIT	PRESS [SET UP] TO EXIT
EXIT	SELECT

CABLE/SAT

TV DVD

DVD 1

ENTER

rtwe

Before starting, make sure of the following:

●The TV aerial cable should be connected to the unit.

●The unit’s mains power cord should be connected to a mains outlet.

●Turn on the TV and select the AV mode.

●Slide the TV/CABLE/SAT/DVD switch to DVD.

1Press A on the unit or DVD A on the remote control to turn on the unit. The Country Set display appears on the TV screen.

2Press FGDE to select your

country’s name, then press	INITIAL SET UP > AREA SELECT
country’s name, then press	BELGIUM	ČESKÁ REPUBLIKA	DANMARK
ENTER. The Language Set	BELGIUM	ČESKÁ REPUBLIKA	DANMARK
	DEUTSCHLAND	ESPAÑA	GREECE

display appears on the TV	ITALIA	MAGYARORSZÁG	NEDERLAND
display appears on the TV	NORGE	ÖSTERREICH	POLSKA
screen.	PORTUGAL	SUISSE	SUOMI
screen.	SVERIGE	OTHER WESTERN	OTHER EASTERN
	SVERIGE	OTHER WESTERN	OTHER EASTERN

NOTES:

● If you have selected ABELGIUMB

or ASUISSEB, go to step 3.

EXITSELECT

●If you have selected

AMAGYARORSZÁGB, AČESKÁ REPUBLIKAB, APOLSKAB or AOTHER EASTERNB, press ENTER. The Clock Set screen appears. Set the clock manually (A pg. 86), then go to step 4.

●If you have selected any other country name, go to step 4.

ATTENTION:

AAUTOB blinks on the front display panel; do NOT press any button on the unit or remote control until the front display panel shows A– –:– –Bas illustrated on page 19.

●When you have connected the unit to a TV offering T-V Link via a fully-wired 21-pin SCART cable (A pg. 16) and the TV is turned on, the unit automatically performs the Preset Download

(A pg. 18) even if you select AAUTO SETB for Auto Set Up function.

ATTENTION:

Once you have performed Auto Set Up, even if the unit’s memory backup has expired, all the stored stations and their Guide Programme numbers remain in the unit’s memory and the unit will not perform Auto Set Up again. The unit only performs Auto Clock Set when the unit is turned on.

If you have moved to a different area, perform each setting as required.

●Tuner setting (A pg. 83)

●Clock setting (A pg. 86)

If a new station starts broadcasting in your area, perform tuner setting. (A pg. 83)

NOTES:

●In areas where no TV station transmits a PDC (Programme Delivery Control) signal, the unit can perform neither Auto Clock Set nor Auto Guide Programme Number Set.

●If there is a power cut, or if you press A or SET UP while Auto Set Up is in progress, Auto Set Up will be interrupted; be sure to turn off the unit power once and try again from step 1.

●Auto Clock Set may not function properly depending on the reception condition.

●If no sound accompanies the picture or the audio sounds unnatural on some channels that have been stored by Auto Set Up, the TV system setting for those channels may be incorrect. Select the appropriate TV system for those channels. (A pg. 85,

AINFORMATIONB)

After AAuto Set UpB is completed, perform AMonitor SetB on page 21.