JVC LPT0976-001B, 1204MNH-SW-VE manual Perfect Connections Recommended, Simple Connections

Page 76

76 EN SYSTEM CONNECTIONS

Connecting To A Satellite Receiver

Perfect Connections (Recommended)

This is an example of recommended connections if your TV

Simple Connections

 

 

has two 21-pin AV input (SCART) connectors.

 

 

Connect the decoder to the satellite receiver’s connector if you

This is an example of a simple connection if your TV has one

have a decoder, [L-1 IN/OUT] connector to TV’s connector, and [L-

21-pin AV input (SCART) connector.

 

2 IN/DECODER] connector to the satellite receiver’s connector.

Connect the satellite receiver to the [L-2 IN/DECODER] connector,

Then connect the satellite receiver and TV.

 

then connect the [L-1 IN/OUT] connector to the TV’s connector.

NOTES:

 

NOTES:

 

● Set AL-2 SELECTB to AVIDEOB or AS-VIDEOB. (A pg. 72)

● Set AL-2 SELECTB to AVIDEOB or AS-VIDEOB. (A pg. 72)

● You can use the Automatic Satellite Programme Recording

● You can use the Automatic Satellite Programme Recording

function (A pg. 53) with this connection. (HDD deck only)

function (A pg. 53) with this connection. (HDD deck only)

● To record a programme via the satellite receiver, select L-2 mode

● To record a programme via the satellite receiver, select L-2 mode

by pressing PR +/– so that AL-2Bappears on the front display

by pressing PR +/– so that AL-2Bappears on the front display

panel.

 

panel.

 

● To receive a scrambled broadcast, descramble the signal with

● For details, refer to the instruction manual of the satellite

the decoder connected to the satellite receiver.

receiver.

 

● For details, refer to the instruction manual of the satellite receiver

 

 

and decoder.

 

Outdoor unit

Aerial

Outdoor unit

Aerial

 

 

Satellite cable

TV aerial cable

 

 

 

 

Satellite cable

TV aerial cable

Satellite receiver

 

 

 

 

ANTENNA IN

Satellite receiver

 

 

 

 

 

ANTENNA OUT

 

ANTENNA IN

 

 

 

 

 

 

ANTENNA OUT

TV

IMPORTANT

When you set AL-2 SELECTB to ASAT VIDEOB or ASAT S-VIDEOB(A pg. 72), it is possible to view a satellite broadcast with the TV set to its AV mode even if the unit is turned off. When the unit is in Stop mode or recording, press TV AV/VIDEO on the remote control to turn off the VIDEO indicator on the front display panel.

●If you turn on the unit when the satellite receiver’s power is off, nothing appears on the TV screen. In this case, turn on the satellite receiver, or set the TV to its TV mode, or press TV AV/ VIDEO on the remote control to set the unit to the AV mode.

Decoder

TV

Page 75 Page 77
Image 76
Page 75 Page 77
Contents DR-MX1S Safety Precautions Failure to heed the following precautions may result Damage to the unit, remote control or discOr remote control Do not place the unitContents About Discs DVD-R/RW DiscsBefore finalising After finalisingUnplayable Discs Discs For Playback OnlyRegion Number Recording Medium And Format File Structure Of DiscsDVD-RAM DVD-RDVD Video Marks Maintenance of discs Care And Handling Of DiscsLabel side Recording sideFront View H I JRegion Number Label a pg AC Power Cord a pg Cooling Fan Rear ViewFront Display Panel Remote Control HDD Button* a pgWhen pressing R during recording When pressing REC Mode Appears for eight secondsPR.12 When capturing images from the external DV equipment Operation Mode Indicators Tape Speed SP/LPOn-Screen Display DV Dubbing On-Screen Display VHS deckTo connect to a TV with 21-pin Scart input connector To connect to TV’s component video input connectorsWhen your TV’s Scart Set AL-1 Output B to Connector accepts Basic ConnectionAuto Set Up Before starting, make sure of the followingPreset Download Set/Auto Guide Programme Number SetOn The Front Display Panel Link FunctionsLanguage EnterMonitor Set Pan&Scan/Letter BoxPan&Scan Letter BoxInstalling Satellite Controller HDD & DVD Deck OnlyBrand Name Code Basic Playback Playback Features Variable Speed SearchStill Picture/Frame-By-Frame Playback Resume Function Slow MotionSkip Search Jump SearchChecking The Time Information Marking Positions To Play Back Again LaterAngle Selection Subtitle Selection Audio Language/Sound Selection Audio Channel SelectionPlayback Control PBC Function One Touch ReplayHow To Access The On-screen Bar Contents of the on-screen bar during playbackBasic Operation On The On-screen Bar Repeat PlaybackDVD-RAM/RW/R Time Search Adjusting The Picture QualitySimulated Surround Effect Random Playback Setting The Progressive ModeProgramme Playback To Change The Settings To Set Parental Lock For The First TimeTo Temporarily Release Parental Lock To change the levelRecording Mode Recording Features Instant Timer Recording ITRWatch Another Programme While Recording On The Unit Elapsed Recording Time And Disc Remaining Time IndicationSelect AFR Justb in a recording mode selection procedure Free Rate FunctionSelection Of The Audio Channel To Be Recorded On a Disc Type of Broadcast BeingPause recording on HDD deck Basic RecordingMemory Playback Watch Another Programme While Recording On The Unit Basic Playback Playback Features Still Picture/Frame-By-Frame Playback5x Speed Search Marking Positions To Play Back Again LaterUsable cassettes Full-Size VHS 30 ST-30 60 ST-60 120 ST-120 160 ST-160 ST-210Compact VHS TC-20 ST-C20 TC-30 ST-C30 TC-40 ST-C40Index Search Next Function Memory Manual TrackingSoundtrack Selection VHS Progressive ScanBasic Recording Recording Features Elapsed Recording Time IndicationS.T. Picture System Tape Remaining TimeRecording/playback Status Display Live Memory PlaybackPress R or Live to stop Live Memory Playback Available only when paused JumpJump + LiveResuming Playback HDD deck only RetroActive Recording HDD deck onlyAbout limitation on temporary recording CTimer Programming Satellite Receiver UsersWeekly/Daily Recording For the HDD deckFor the DVD deck Once One Time Recording Weekly Weekly RecordingManual Timer Programming Relief RecordingCancel And Change Programmes Check ProgrammesRecording HDD Deck OnlyBTimer Programming ProgrammeManual Timer Programming VPS/PDC RecordingWhen Programmes Overlap Each Other Check, Cancel And Change ProgrammesWhen the VHS lamp does not light up on the unit To change the programme settingAbout registration of information Limitations of registrationEdit Icons and their meaningsModify Index Scan For Beginning Of Title Edit Original InformationModify Title Name RAM & DVD-RWVR mode only Modify Category Unwanted Part Of The TitleProtect Title DVD Delete TitleModify Chapter HDD, DVD-RAM & DVD-RW VR mode only Edit Play List InformationDivide Title HDD deck only Play ListCreate Play List Edit ScenesAdd scenes Move ScenesEdit Library Information Desired group, then press List of files in the selectedGroup appears ENTER. The unit startsDubbing Just Dubbing From HDD To DVDHigh Speed Dubbing From HDD To DVD Manual Dubbing From HDD To DVDDubbing From HDD To VHS Original Dubbing From DVD To HDDDubbing From VHS To HDD Dubbing An Entire CassetteDubbing From VHS To HDD Dubbing a Programme From Cassette Dubbing From VHS To DVD Dubbing An Entire CassetteWhen performing the Just Dubbing When performing the Manual DubbingDubbing From VHS To DVD About Disc Remaining DisplaySound monitor switch Remote control switchAuto capture button When you dub from DV equipment other than a camcorder To skip unwanted part of the source pictureIf the camcorder has no S-VIDEO output connector Edit From a CamcorderWhen using your unit as the recording deck When using your unit as the source playerFor HDD/DVD deck Select Setting Output And L-1 Input SettingOutput/Input Set Digital Audio Dubbing Input SettingExample Dubbing to an MD Remote Control Functions Remote Control 1/2/3/4 Code SwitchingTV Multi-Brand Remote Control Keep pressing SET UP down during stepSlide the TV/CABLE/SAT/DVD switch to CABLE/SAT Has two 21-pin AV input Scart connectors Pin AV input Scart connectorIN/DECODER connector to the satellite receiver’s connector Perfect Connections RecommendedWhen you can’t switch the audio channel of a bilingual Connecting/Using a DecoderProgramme Mode Set To record PAL signals To record Secam signals or a Mesecam tapeSelect this to dub the main channel Select this to dub the sub channelYou can change the brightness of the front display panel To turn off superimposed indicationsNormally select this VHS Deck Only Tray Lock DVD Deck Only For ExampleAbout Ntsc Playback To lock trayCSystem Setup Tuner SetGuide Programme Number Set Auto Channel SetManual Channel Set When Receiving a Scrambled Broadcast HDD & DVD Deck Only Fine-Tuning Channels Already StoredDelete a Channel Change Station Channel PositionClock Set Just ClockFormat a DVD-RAM Disc Format a Disc DVD Deck OnlyFormat a DVD-RWDisc After finalising For DVD-R/RW Video mode discs Cancel The Finalisation Of a DVD-RWDiscFinalise a DVD-R/RW Disc Watch the images on VHS deck in the Progressive Scan mode via component videoPress Progressive Scan Playback DVD Deck Initialising DVD Deck OnlyGeneral Playback HDD DeckTimer Recording HDD & DVD Deck Playback VHS DeckRecording DVD Deck Recording HDD DeckOther Problems Timer Recording VHS DeckFor basic connection For component video connectionTimer recording has finished during Live Memory playback On-screen Message HDD & DVD Deck OnlyDuring Live Memory playback, o has been pressed. a pg An invalid anumber has been input. a pgPower requirement Power consumptionTemperature Dimensions WxHxDLanguage Code List Country/Area Code List for Parental Lock Appendix EN TV Station And ID List Station NameCancel And Change Programmes Instant Timer Recording ITRWhen Programmes Overlap Each Other Audio Language/Sound SelectionDR-MX1S
Top Page Image Contents