CTimer Programming, Satellite Receiver Users

ENTER

FGDE

RETURN

DISPLAY

VPS/PDC#

1 Load a recordable disc if recording to DVD.

2 Press PROGRAMME to access the programme top screen.

3 Press FGDE to select ASHOWVIEWB, then press ENTER. ● When APROGRAMME FULL DELETE UNWANTED TIMER PROGRAMMESB appears on the TV screen, you need to

cancel some of the reserved programmes. (A pg. 52)

TIMER RECORDING ON HDD/DVD DECK EN 49

cTimer Programming

7 The anumber you entered and the matching timer-

recording information are displayed on the TV screen. Check

the programme data.

You can programme this unit to timer-record as many as 16

● To cancel this setting, press RETURN.

programmes.

IMPORTANT:

With the asystem, timer programming is greatly simplified

because each TV programme has a corresponding code number

Make sure the channel position number you wish to record is

which your unit is able to recognise.

displayed; if not, see AcSystem SetupB (A pg. 83) and

You can use the remote control to enter the anumber.

set the Guide Programme number correctly.

8 Press FG to select the desired recording option as required.

● Make sure that the unit’s built-in clock is set properly.

● Turn on the unit.

Press FG to select the desired setting, then press ENTER.

● Turn on the TV and select the AV mode.

● AINPUT TITLEB (A pg. 58, AModify Title NameB)

● Slide the TV/CABLE/SAT/DVD switch to DVD.

● ACATEGORYB (A pg. 59, AModify CategoryB)

● AVPS/PDCB (A pg. 50, AVPS/PDC RecordingB)

● AWEEKLY/DAILYB (A pg. 50, AWeekly/Daily RecordingB)

CABLE/SAT

● AREC MODEB (A pg. 34, ARecording ModeB)

DVD

9 Press FG to select AOKB, then press ENTER to access the

Programme Confirmation screen.

10 Press DE to select AEXITB, then press ENTER to complete

0 – 9

timer programming.

● To programme another timer, press DE to select

ACONTINUEB, then press ENTER.

PROGRAMME

● If APROGRAMME OVERLAPPEDB appears on the TV screen,

delete or modify the programmes.

4 Press the number keys to

enter the anumber of

132

PROGRAMME > SHOWVIEW (1/2)

a programme you wish to

SHOWVIEW NO.

1 2 3 4

record.

SELECT WITH @

THEN PRESS [ENTER]

Press FGDE to select the

PRESS [PROGRAMME]

TO EXIT

DELETE

DELETE ALL

desired number key on the

PROGRAMME

ENTER

RECORD TO

DVD

screen, then press ENTER.

EXIT

SELECT

CONFIRM

Repeat to enter all required numbers.

●If you have made a mistake, press FGDE to select ADELETEB or ADELETE ALLB, then press ENTER and input the correct number before you press ENTER again.

5Press FG to select ARECORD TOB, then press ENTER. Press FG to select the desired recording deck, then press ENTER.

6Press FGDE to select ACONFIRMB, then press ENTER.

●If the number you entered is invalid, ASHOWVIEW NO. ERROR

CONFIRM SHOWVIEW NO. THEN RETRYB appears on the TV screen. Input a valid anumber.

●If AGUIDE PROGRAMME IS NOT SET SET GUIDE PROGRAMME THEN RETRYB appears on the TV screen, set Guide Programme Numbers manually. (A pg. 83)

NOTES:

●There may be cases that the aTimer Programming function prolongs the stop time of the programming.

●When two successive programmes are recorded on a DVD-RW disc with the aTimer Programming function, the beginning of the second one may be left off the recording.

●If the copy limited programme is received during timer-recording, the unit enters Record Pause mode. Recording starts again if it is switched to a recordable broadcast during the time you programmed.

IMPORTANT:

If you have moved to a different area or if a broadcasting station’s channel number has been changed, the wrong channel number will be displayed on the aprogramme screen in step 7. When this happens, set the correct Guide Programme number for that station. (A pg. 83, AcSystem SetupB)

Satellite Receiver Users

To timer-record a satellite broadcast using the asystem:

APerform ASatellite Receiver Control Setting (HDD & DVD Deck Only)B (A pg. 22).

BPerform AcTimer ProgrammingB (A pg. 49).

CLeave the satellite receiver’s power on.