BASIC OPERATIONS ON VHS DECK EN 43
Next Function Memory
The Next Function Memory AtellsB the unit what to do after rewinding. Before continuing, make sure the unit is in the Stop mode.
For Automatic Start Of Playback
Press O, then press I within 2 seconds.
Repeat Playback
Your unit can automatically play back the whole tape 100 times repeatedly.
1Press I to start playback.
2Press and hold I for over 5 seconds, then release.
●AxB lights up on the front display panel.
●After playing back a tape 100 times, the unit stops automatically.
3Press o at any time to stop Repeat Playback.
●Pressing I, O, N or W also stops Repeat Playback.
Manual Tracking
Your unit is equipped with automatic tracking control. During playback, you can override this and adjust the tracking manually by pressing the PR buttons.
1During playback, press PR +/– on the unit simultaneously to activate manual tracking.
2Press PR +/– to adjust the tracking manually.
●To return to automatic tracking, press PR +/– simultaneously or eject and insert the tape again.
NOTE:
When a new tape is inserted, the unit enters the automatic tracking mode automatically.
Soundtrack Selection
Your unit is capable of recording three soundtracks
During Playback
Pressing AUDIO changes the soundtrack as follows:
TRACK | USE | |
| ||
| ||
|
| |
For | ||
L W X R | ||
| ||
|
| |
For main audio of Bilingual tapes | ||
L W | ||
| ||
|
| |
For sub audio of Bilingual tapes | ||
X R | ||
| ||
|
| |
NORM | For | |
|
| |
For | ||
NORM | ||
| ||
|
|
NOTES:
●
●For instructions on recording stereo and bilingual programmes, refer to page 45.
●AO.S.D.B must be set to AAUTOB or the
VHS Progressive Scan
You can watch the images on VHS deck in the Progressive scan mode via component video.
ATTENTION:
Your TV needs to be compatible with Progressive and to have Component video input connectors.
1Press HDD or DVD so that the HDD or DVD lamp lights up on the unit.
2Set
3Press PROGRESSIVE SCAN for 3 or more seconds.
●The video output indicator q lights up on the front display panel.
4Press VHS so that the VHS lamp lights up on the unit, then press PROGRESSIVE SCAN.
●ACOMP OFFB is displayed on the front display panel. It will be displayed for 5 seconds.
5Press PROGRESSIVE SCAN again within 5 seconds.
●ACOMP ONB is displayed on the front display panel and q lights up on the front display panel.
●The VHS progressive scan image will then be outputted from the [COMPONENT VIDEO OUT (Y/PB/PR)] connectors.
NOTES:
●Be sure to engage the HDD or DVD deck in stop mode.
●It is possible to watch in interlace mode through the component video connection
However, q will not light up on the front display panel as the image outputted is not in progressive mode.