JVC LPT0976-001B manual Tray Lock DVD Deck Only, For Example, About Ntsc Playback, To lock tray

82 EN SUBSIDIARY SETTINGS

		Tray Lock (DVD Deck Only)
8 AUTO SPNLP TIMER ^ ON / OFF
When this function is set to AONB, the unit automatically switches to
	You can lock the disc tray to prohibit the unwanted disc ejection by
LP mode to allow complete recording if there is not enough tape to
record the entire programme while timer-recording in SP mode.	children.
For Example:
	● Turn off the unit.
Recording a programme of 140 minutes in length onto a 120-
minute tape.

Approximately 110 minutes	Approximately 30 minutes
SP mode	LP mode

Total 140 minutes

Make sure you set this function to AONB, before the timer-recording starts.

NOTES:

●If you have programmed the unit to timer-record 2 or more programmes, the second programme and those thereafter may not fit on the tape if you set AAUTO SPNLP TIMERB to AONB. In this case, make sure the mode is not engaged, then set the tape speed manually during timer programming.

●In order to ensure that the recording fits on the tape, this feature may leave a slight non-recorded section at the end of the tape.

●There may be some noise and sound disturbance at the point on the tape where the unit switches from SP to LP mode.

●The Auto SPNLP Timer feature is not available during ITR (Instant Timer Recording), and the feature will not work properly on the following tapes: T(ST)-30, T(ST)-60, T(ST)-90, and T(ST)-120.

8COLOUR SYSTEM ^ PAL/NTSC / MESECAM

You can play back PAL, NTSC and MESECAM tapes, or record PAL and SECAM* signals on this unit. Select the appropriate colour system.

*SECAM signals will be recorded as MESECAM on this unit; MESECAM is the designation for tapes with SECAM signals that have been recorded on a MESECAM-compatiblePAL video cassette recorder.

PAL/NTSC:

To record PAL signals, or play back a PAL or NTSC tape.

MESECAM:

To record SECAM signals, or play back a MESECAM tape.

NOTES:

●SECAM signals recorded on the HDD or DVD deck are played back as PAL signals. As such, when dubbing to VHS deck, make sure to set ACOLOUR SYSTEMB to APAL/NTSCB.

About NTSC Playback

●Some TVs shrink the picture vertically and place black bars at the top and bottom of the TV screen. This is not a malfunction on the part of either the unit or the TV.

●The picture may roll up and down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.)

●The counter and tape remaining time readings will be incorrect.

●During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.

●Depending on the type of TV, the top and bottom portions of superimposed displays may be cut off during NTSC playback.

M o

To lock tray

While the unit is turned off, press and hold o, then press M on the unit. ALOCKB appears on the front display panel and the disc tray is locked.

To unlock tray

While the unit is turned off, press and hold o, then press M on the unit. AUNLOCKB appears on the front display panel.