JVC LPT0976-001B, 1204MNH-SW-VE manual To turn off superimposed indications, Normally select this

80 EN SUBSIDIARY SETTINGS

DISPLAY SET

8SUPERIMPOSE ^ OFF / AUTO

When this function is set to AAUTOB, various operational indicators appear on the TV screen. Messages appear in the selected language. (A pg. 20)

OFF:

To turn off superimposed indications.

AUTO:

To superimpose operational indications for approximately five seconds just after the corresponding operation.

NOTES:

●Even when ASUPERIMPOSEB is set to AOFFB, you can display the various operational indicators by pressing ON SCREEN. To clear the operational indicators, press ON SCREEN again.

●When you use this unit as the source player for editing, be sure to set ASUPERIMPOSEB to AOFFB before starting. (A pg. 71)

●When you select AAUTOB, during playback, the operation mode indicators may be disturbed depending on the type of disc being used.

8BLUE BACK ^ OFF / ON

When this function is set to AONB, the TV screen becomes all blue when receiving a channel not in use.

NOTE:

When you want to receive an unstable channel with poor signals, set this function to AOFFB.

8DIMMER ^ BRIGHT / DIMMED

You can change the brightness of the front display panel.

BRIGHT:

Normally select this.

DIMMED:

To dim the front display panel. (Blue lamp on the front display panel is turned off.)

8POWER SAVE ^ OFF / ON

When this function is set to AONB, you can reduce the power consumption while the unit is turned off.

NOTES:

●During Power Save mode ^

^the front display panel will be turned off.

^the Just Clock function (A pg. 86) does not work.

●Power Save does not work when ^

^the unit is in the Timer mode.

^the unit’s power is turned off after timer-recording or Instant Timer Recording.

^the Automatic Satellite Programme Recording mode is engaged. (A pg. 53)

^AL-2 SELECTB is set to ADECODERB, ASAT VIDEOB or ASAT S-VIDEOB. (A pg. 72)

●It takes some time for the unit to complete initialisation after you turn on the unit power, with AWAKE UPB blinking on the front display panel.

8ON SCREEN LANGUAGE

This unit offers you the choice to view on-screen messages in 10 different languages. Though Auto Set Up selects the language automatically (A pg. 19), you can change the language setting manually as required.

For details, refer to AOn-screen Language SetB (A pg. 20)