Marking Positions To Play Back Again Later

BASIC OPERATIONS ON DVD DECK EN 27

	CABLE/SAT
	TV	DVD
	DVD
0-9
	MARK
ENTER
	rtwe
MENU	RETURN
S/PREVIOUS	T/NEXT
I
o
REMAIN	SET UP
DISPLAY	SET UP
DISPLAY
AUDIO
SUBTITLE	ANGLE

Marking Positions To Play Back Again Later

It is possible to mark positions (up to 999 points) where you want to play back once again later, and start playback from a marked position. Marking onto DVD-RAM/RW (VR mode only) discs when recording is helpful to locate a start point when you play back the discs later.

To mark positions:

During playback, press MARK at positions you want to mark.

●AMARKB appears on the TV screen.

You can easily locate the marked positions using S or T when you play back the disc.

To delete the marked positions:

While paused, press S or T to locate a marked position you want to delete, then press MARK.

●Crossed AMARKB appears on the TV screen, and the marked position is deleted.

NOTES:

●When a monaural programme changes to a stereo programme while recording, a mark signal is automatically recorded.

●Titles will be divided into AchaptersB at the marked points according to the disc types as follows:

DVD-R/RW (Video mode): After finalising, titles are divided into AchaptersB at the marked points that are marked automatically approximately every 5 minutes during recording before finalising. (A pg. 88)

DVD-RW (VR mode): After finalising, titles are divided into

AchaptersB at the marked points that are marked at the desired locations during playback before finalising. (A pg. 88) DVD-RAM: Titles are divided into AchaptersB at the marked points that are marked at the desired locations during playback.

DVD VIDEO: Creating of marked points are not permitted.

Checking The Time Information

You can check time information of a disc on the front display panel and the TV screen.

Each press of DISPLAY changes the display as follows:

8DVD-RAM/DVD-R/DVD-RW During recording

Clock time (front display panel only) N Current title elapsed time N Disc remaining time* N (back to the beginning)

* only discs before finalising

● Clock time is displayed only when a recordable disc is recorded.

During playback

Each title elapsed time N Current title elapsed time N Disc remaining time* N (back to the beginning)

* only discs before finalising

In stop mode or during playback

●It is possible to check disc remaining time according to recording modes also by pressing REMAIN.

●In FR mode, it is possible to set recording time in detail. While the

recording mode and the disc remaining time are displayed by pressing REMAIN, press FG to select AFRB, then press DE to select the desired recording time. (A pg. 36)

●It is not possible to switch the recording mode during playback or while recording.

8Video CD/SVCD/Audio CD During playback

Current track elapsed time N Current track remaining time N Total elapsed time N Total remaining time N (back to the beginning)

In stop mode

0:00 N Playback time of track 1 N 0:00 N Total length of a disc N (back to the beginning)

NOTE:

When a PBC-compatible Video CD/SVCD disc is loaded, deactivate the PBC function. (A pg. 28)

Angle Selection

You can enjoy a variety of scene angles if a DVD VIDEO disc contains Amulti-angleBparts, where the same scene was shot from different angles.

If the disc contains Amulti-angleBparts, AyB appears on the TV screen at the beginning of the Amulti-angleBpart.

1Press ANGLE during

	playback. The angle selection
	display appears on the TV	When 3 scene angles are
	screen.	When 3 scene angles are
2	screen.	contained.
	Press ANGLE or DE to select	contained.
	Press ANGLE or DE to select

your desired angle.

● Each time you press ANGLE or DE, the angle changes.

● When A7B appears on the TV screen, the current scene is not recorded from multiple angles. In addition, some discs prohibit angle selection.

● To clear the angle selection display, press ENTER. In addition, the angle selection display disappears automatically if no operation is done for 10 seconds.