JVC LPT0976-001B, 1204MNH-SW-VE manual Clock Set, Just Clock

CLOCK SET

TUNER SET

86 EN SUBSIDIARY SETTINGS

Clock Set		6 Press FG to select ATV PROGRAMMEB, then press ENTER.
		Press FG to set the channel position to the number
		representing the station transmitting clock setting data, then
		press ENTER.
IMPORTANT:		● The unit is preset to receive clock setting and adjustment data
If you performed Auto Set Up (A pg. 17) or Preset Download		from channel position 1.
(A pg. 18), without ever having set the clock previously, the		7 Press SET UP to start the clock operation.
unit’s built-in clock is also set automatically.		NOTES:
Perform the following steps only if ^
		● Just Clock (when set to AONB) adjusts the unit’s built-in clock
^ Auto Clock Set has not been performed correctly by Auto Set
		every hour, except for 23:00, 0:00, 1:00 and 2:00.
Up or Preset Download.
		● Just Clock is not effective when:
OR
		^ the unit’s power is on.
^ you want to change Just Clock setting. (See AJust ClockB in		^ the unit is in the Timer mode.
the right column)		^ a difference of more than 3 minutes exists between the built-in
		clock’s time and the actual time.
● Turn on the unit.		^ the unit is in the Automatic Satellite Programme Recording
		mode. (A pg. 53) (HDD deck only)
● Turn on the TV and select the AV mode.
		^ the unit is in the Power Save mode. (A pg. 80)
● Slide the TV/CABLE/SAT/DVD switch to DVD.
		^ AL-2 SELECTB is set to ASAT VIDEOB or ASAT S-VIDEOB.
		(A pg. 72)
CABLE/SAT		● If Just Clock is set to AONB, the unit’s clock is automatically
TV	DVD
		adjusted at the start/end of Summer Time.
		● Just Clock may not function properly depending on the reception
		condition.
		Just Clock
		The Just Clock function provides accurate time keeping through
		automatic adjustments at regular intervals, by reading data from a
		PDC signal.
ENTER		The Just Clock option can be set to AONB or AOFFB at the Clock Set
		screen (the default setting is AOFFB).
rtwe		IMPORTANT:
		If you turn off Just Clock, the accuracy of your unit’s built-in clock
		may be reduced, which could adversely effect timer recording. We
		recommend you to keep Just Clock on. In cases where the clock
		setting data from a PDC signal is incorrect, however, you are
		advised to keep Just Clock set to AOFFB.
SET UP

1Press SET UP to access the Main Menu screen.

2Press DE to select AINITIAL SET UPB, then press G.

3Press DE to select ACLOCK

SETB, then press G. DVD VIDEO SET UP HDD/DVD SET UP FUNCTION SET UP INITIAL SET UP

NOTE:

When you have selected

AMAGYARORSZÁGB, AČESKÁ REPUBLIKAB, APOLSKAB or AOTHER EASTERNB for the country setting (A pg. 17), you cannot use Just Clock function. Skip steps 5 and 6.

YEAR		2004
DATE		01. 01 THU
TIME		--:--
JUST CLOCK		OFF
TV PROGRAMME		1
SET UP	ENTER	SELECT WITH @ THEN PRESS [ENTER]
EXIT	SELECT	PRESS [SET UP] TO EXIT

4Press FG to select AYEARB, then press ENTER. Press FG to set the year, then press ENTER.

●Repeat the same procedure to set the date and time.

●When you set the date, press and hold FG to change the date by 15 days interval.

●When you set the time, press and hold FG to change the time by 30 minutes interval.

5Press FG to select AJUST CLOCKB, then press ENTER. Press FG to set to the desired mode, then press ENTER.

●The default setting is AOFFB.

●For the Just clock function, refer to AJust ClockB on the right column.

●If you set to AOFFB, you can disregard the next step as you won’t be able to receive regular clock adjustments.