Entry Switch, Important Considerations | Heath Zenith 598-1116-10

Entry Switch

Installation

Note: Entry system includes a transmitter and magnet. The system can be used to signal that a door or window has been opened or to automatically turn the light on when entering a closet, attic, room, etc.

1.Remove Tab from Battery Chamber. Remove transmitter back cover from transmitter using small, flat-blade screwdriver. Gently pull tab out of battery chamber.

	Transmitter	Tab
Flat-Head	Battery (Type		CR2032	3 VOLTS
Flat-Head	Battery (Type

Screwdriver	CR2032)

Removing Battery Tab

Important Considerations:

•Entry transmitter components are for indoor use only.

•The transmitter should be mounted on the frame of door or window (stationary surface). The magnet should be mounted on door or window (moving surface). See illustration below for mounting configurations and possible directions of movement.

Transmitter Mounted On Stationary Surface

Possible Directions of	Possible Dir
Possible Directions of	Possible Directions of
Movement	Movement

Magnet Mounted On Moving Surface

Mounting Configurations and Possible Directions of

Movement

•A compatible receiver must be used to complete the system. The receiver should be located within 100 feet (30 m) of transmitter (maximum distance may vary depending on type of structures between transmitter and receiver).

2.Select mounting location for entry transmitter. Note: Maximum gap between transmitter and magnet is 3/8” and the arrows located on the face of each component must be in alignment (see illustration). Also, the front surfaces of the transmitter and magnet must be flush. If magnet is recessed, use magnet extension and two long screws (provided) to ensure proper alignment.

3/8" MAXIMUM

3.Before mounting, hold transmitter and magnet in selected location and verify operation. While holding the transmitter stationary, move the magnet away from transmitter to simulate door or window being opened. Verify red LED on transmitter flashes momentarily and receiver turns light on. Return magnet to original position simulating door or window being closed.

Verify red LED on transmitter flashes momentarily and receiver turns light off. Note: If transmitter does not operate correctly, see Troubleshooting Guide.

4.Mount Transmitter.

ScrewMounting:Attach transmitter back cover to wall using two short screws (provided). Snap transmitter onto back cover. Tape Mounting: Apply large piece of foam tape (provided) to the transmitter back cover. Stick transmitter back cover to frame of door or window in desired position. Snap transmitter onto back cover.

5.Repeat step 4 to attach magnet to door or window.

Battery Replacement

The entry transmitter requires a type CR2032, 3-volt lithium battery to operate. The transmitter is shipped with the battery installed. With typical use, the battery will last approximately five years. Remove battery when transmitter will not be used for an extended period of time.

1.	Remove transmitter from
	transmitter back cover	Transmitter
	using small, flat-blade	Transmitter
	using small, flat-blade
	screwdriver.
2.	Carefully pry battery
	loose with small, flat-blade
	screwdriver. Battery will
	pop up.	Flat-Blade
3.	Install replacement battery	Screwdriver
	in socket plus (+) side up	CR2032 3 VOLTS
	(see illustration). Press	CR2032 3 VOLTS
	down on battery until it
	snaps into place.	CR2032 Lithium Battery
4.	Snap transmitter onto	CR2032 Lithium Battery
	back cover.	Battery Replacement

Note: The magnet does not require a battery.

ENGLISH

598-1116-10

598-1116-10 specifications

The Heath Zenith 598-1116-10 is an advanced motion-sensing outdoor light designed to enhance security and functionality around homes and businesses. This fixture is engineered with the latest technologies to provide reliable performance while ensuring energy efficiency and ease of use.

One of the main features of the 598-1116-10 is its state-of-the-art motion sensor. The device employs a passive infrared (PIR) technology that detects movement within a significant range, ensuring that any motion in its monitored area triggers the light. The sensor is adjustable, allowing users to customize the detection range and sensitivity to suit their specific environment. This adaptability is crucial for minimizing false alarms from unwarranted movements, such as passing cars or animals.

In addition to its motion-detection capabilities, the Heath Zenith 598-1116-10 offers various lighting options. The fixture is equipped with a powerful LED light source that produces a bright output while consuming less energy than traditional incandescent bulbs. This not only aids in lowering electricity costs but also contributes to a longer lifespan for the light, reducing the frequency and hassle of bulb replacements.

The design of the 598-1116-10 reflects both aesthetic appeal and functional robustness. The weather-resistant construction ensures that the light can withstand various climatic conditions, making it suitable for installation in different outdoor environments. The sleek and modern design complements a wide range of architectural styles, enhancing the property’s overall curb appeal.

Another important characteristic of this outdoor security light is its convenient operating features. The device includes a manual override option, allowing homeowners to keep the light on continuously for extended periods when needed, such as during gatherings or outdoor events. Additionally, the light can be set to operate on a timer, providing flexibility and control over illumination schedules.

In conclusion, the Heath Zenith 598-1116-10 stands out in the outdoor lighting market due to its motion-sensing technology, energy-efficient LED lighting, durable design, and user-friendly features. It serves not only as a means of illumination but also as a crucial security element, helping to deter potential intruders while offering peace of mind for property owners. This combination of practicality and style makes the 598-1116-10 a top choice for those looking to enhance their outdoor lighting system.