Heath Zenith 598-1116-10 operating instructions Features, Code Settings

Page 1

Remote Controlled Products

This manual includes operating instructions for a variety of remote controlled products. All products work on the same principle and use the same code setting information. Please read all instructional information and note any specific information pertaining to your particular product.

WARNINGS:

•FOR USE ONLY with 120 volt incandescent or halogen bulbs.

•DO NOT USE with fluorescent bulbs, appliances, power supplies, low voltage lighting, or any other electrical devices.

This manual applies to the following products:

• Transmitters

• Receivers

– Remote Control

– Indoor Plug-In Converter

– Add-A-Switch

– Lamp Socket Converter

– Entry Switch

– Floodlight

–Indoor Wireless Motion Sensor

–Outdoor Wireless Motion Sensor

Features

•Products are UL/cUL and/or FCC/IC tested and approved.

•Operational range of up to 100 feet.

Heath®/Zenith wireless lighting controls are designed to work together. Simply determine which transmitter(s) you would like to have control which receiver(s) and set the code setting to match.

ENGLISH

Code Settings

Note: Most single system installations will not require any change to the code setting. Transmitter(s) and receiver(s) must have the same code and group setting to work together. Switches 1 through 3 set the code. Switch 4 sets the Group (A or B). See page 2 for switch locations.

Example 2 - Code Settings, System 2

Note: When operating more than one system independently of each other, set each system to a different code. There are 8 codes avail- able by changing the settings of switches 1 through 3.

Receiver(s)

Transmitter

Code

Code

Example 1 - Code Settings, System 1

(Factory Setting)

 

Left Side Controls:

 

 

Right Side Controls:

Controls One Set of

DIM

DIM

Controls One Set of

 

Group “A” or Group

 

 

Group “A” or Group

 

“B” Receiver(s)

ON

ON

“B” Receiver(s)

 

 

OFF

OFF

 

 

Transmitter(s)/

 

 

Transmitter(s)/

 

Receiver(s) Code

 

 

Receiver(s) Code

 

Group “A”

 

 

Group “B”

(

– Indicates Position of Switch)

 

Group “A”

Group Switch

 

(Group “A” Selection Shown)

Example 3 - Code Settings with Single Transmitter

When using a single group transmitter (i.e. Door Transmitter,Add-A- Switch, Remote Motion Sensor) the code and group settings must match receiver(s) for the system to function properly.

Receiver(s)

Remote Motion

Code

Sensor Code

Group “A”

Group “A”

Note: This setting will work independently of examples 1 and 2 because the code setting is different.

Note:The code can also be changed to reduce interference problems from other wireless products (i.e.wireless phones, garage door open- ers, etc.). See Troubleshooting Guide for more information.

© 2007 HeathCo LLC

598-1116-10

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Code Settings FeaturesExample 2 Code Settings, System Example 1 Code Settings, SystemRemote Control Add-A-Switch Entry Switch Code Switch LocationsLamp Socket Converter Floodlight Indoor Plug-In ConverterRear View of Remote Control Remote ControlOptional Car Visor Clip Included Function ControlsInstallation Add-A-SwitchBattery Replacement Add-A-Switch Removing Battery TabMounting Configurations and Possible Directions Movement Entry SwitchBattery Replacement Important ConsiderationsSelect Night or 24 Hour Mode Indoor and outdoor Wireless Motion SensorInstalling Batteries Battery CompartmentInstalling Outdoor Motion Sensor Installing Indoor Motion Sensor Directly To WallCheck Operation and Adjustment Outdoor Motion Sensor Coverage Area Adjusting Outdoor Motion Sensor CoverageIndoor and Outdoor Motion Sensor Sensitivity Motion Sensor ControlsIndoor Plug-In Converter Receiver InformationLamp socket converter SpeakerJunction box ground wire to green Ground screw on fixture Install fixture in accordance with local codesWiring Floodlight FloodlightTechnical Service Troubleshooting GuideNo Service Parts Available for this Product Regulatory InformationTWO Year Limited Warranty Calibraciones DEL Código CaracteristicasEjemplo 1 Calibraciones del código, sistema Ejemplo 2 Calibraciones del código, sistemaTornillo Ubicaciones DE LOS Interruptores DE Circuito ImpresoTapa Convertidor enchufable para usarse Bajo techoPresilla opcional del visor del carro incluida Control remotoControles de las funciones Vista posterior del control remotoInstalación Interruptor a añadibleOperación Reemplazo de la bateríaConsideraciones importantes Interruptor DE EntradaInstalación de las baterías Seleccione modo nocturno o modo de 24 horasControl Compartimento de la bateríaTornillo de la Abrazadera Montura giratoria de bola De montajeMovimiento Tornillo de MontajeRevisión de la operación y de la regulación Instalación del detector de movimiento para uso ExteriorInstalación del detector de movimiento Detector de movimiento para uso exterior Los controlesApunte el detector Controles del detector de movimientoConvertidor enchufable para Usarse bajo techo Información DEL ReceptorConvertidor del zócalo de la Lámpara Ubicación de los controlesNegro ReflectorEmpaque Cableado del reflectorServicio Técnico Guía de Análisis de AveríasInformación Regulatoria No hay piezas de servicio disponibles para este productoGarantía Limitada a 2 Años Réglage DES Codes CaractéristiquesExemple 1 Réglage des codes, System Exemple 2 Réglage des codes, systèmeTélécommande Interrupteur d’appoint Interrupteur d’entrée Emplacement DES MICRO-INTERRUPTEURSCommandes des fonctions TélécommandeVue arrière de la télécommande Pince de pare-soleil d’automobile facultative CompriseInterrupteur d’appoint Remplacement de la pileFonctionnement Retrait de l’onglet de la pileTournevis plat Interrupteur D’ENTRÉERetrait de l’onglet de pile Détails importantsInstallation des piles Sélection du mode de nuit ou du mode 24 heuresDétecteurs DE Mouvement Sans FIL Intérieurs ET Extérieurs Compartiment des pilesDétecteur de Important Serrer à la main seulement, ne pas trop serrerInstallation du détecteur de mouvement Installation du détecteur de mouvements extérieurCommandes du détecteur de mouvement Vérification du fonctionnement et du réglageZone de couverture du détecteur de mouvements extérieur Zone de couverture du détecteur de mouvements intérieurMouvementMouvement Convertisseur enfichable intérieur Informations SUR LE RécepteurConvertisseur de douille ’ampoule Haut-parleurNoir à noir ProjecteurCâblage du projecteur Guide DE Dépannage Service TechniqueRenseignements de règlements Aucune pièce de rechange n’est disponible pour ce produitGarantie Limitée DE 2 ANS Çais fran 598-1116-10

598-1116-10 specifications

The Heath Zenith 598-1116-10 is an advanced motion-sensing outdoor light designed to enhance security and functionality around homes and businesses. This fixture is engineered with the latest technologies to provide reliable performance while ensuring energy efficiency and ease of use.

One of the main features of the 598-1116-10 is its state-of-the-art motion sensor. The device employs a passive infrared (PIR) technology that detects movement within a significant range, ensuring that any motion in its monitored area triggers the light. The sensor is adjustable, allowing users to customize the detection range and sensitivity to suit their specific environment. This adaptability is crucial for minimizing false alarms from unwarranted movements, such as passing cars or animals.

In addition to its motion-detection capabilities, the Heath Zenith 598-1116-10 offers various lighting options. The fixture is equipped with a powerful LED light source that produces a bright output while consuming less energy than traditional incandescent bulbs. This not only aids in lowering electricity costs but also contributes to a longer lifespan for the light, reducing the frequency and hassle of bulb replacements.

The design of the 598-1116-10 reflects both aesthetic appeal and functional robustness. The weather-resistant construction ensures that the light can withstand various climatic conditions, making it suitable for installation in different outdoor environments. The sleek and modern design complements a wide range of architectural styles, enhancing the property’s overall curb appeal.

Another important characteristic of this outdoor security light is its convenient operating features. The device includes a manual override option, allowing homeowners to keep the light on continuously for extended periods when needed, such as during gatherings or outdoor events. Additionally, the light can be set to operate on a timer, providing flexibility and control over illumination schedules.

In conclusion, the Heath Zenith 598-1116-10 stands out in the outdoor lighting market due to its motion-sensing technology, energy-efficient LED lighting, durable design, and user-friendly features. It serves not only as a means of illumination but also as a crucial security element, helping to deter potential intruders while offering peace of mind for property owners. This combination of practicality and style makes the 598-1116-10 a top choice for those looking to enhance their outdoor lighting system.
Top Page Image Contents