Heath Zenith 598-1116-10 Troubleshooting Guide, Technical Service, Regulatory Information

Page 11

Troubleshooting Guide

SYMPTOM

POSSIBLE CAUSE

SOLUTION

 

 

 

 

 

 

 

 

 

Device does not come on.

1.

Circuit breaker or fuse is turned off.

1.

Verify circuit breaker or fuse is turned

 

 

 

 

 

 

on.

 

 

 

2.

Switch on device is turned off.

2.

Verify switched device is turned on.

 

ENGLISH

 

3.

Interrupted by another device.

3.

Change codes on transmitter and

 

 

 

 

 

 

 

 

receiver units.

 

 

 

4.

Does not respond immediately after

4.

Wait for 90 second initialization period

 

 

 

 

installation.

 

(remote motion sensor).

 

 

 

5.

Signals from transmitter are being

5.

Check for metal objects that could

 

 

 

 

blocked, or transmitter is out of range.

 

block the signal, or reposition the

 

 

 

 

 

 

transmitter.

 

 

 

6.

Weak battery in the transmitter.

6.

Check battery charge and replace if

 

 

 

 

 

 

necessary.

 

 

 

7.

Dip switches on transmitter and receiver

7.

Verify code settings on transmitter and

 

 

 

 

units do not match.

 

receiver units are set the same.

 

 

 

8.

Device is defective.

8.

Test using different device.

 

 

 

 

 

 

 

 

 

Device does not turn off.

1.

Same as 5, 6, and 7 above.

1.

Same as 5, 6, and 7 above.

 

 

 

 

 

 

 

 

 

Device comes on randomly.

1.

Short term power line failure.

1.

Next transmission from transmitter

 

 

 

 

 

 

will reset receiver to correct state.

 

 

 

2.

Another transmitter on the same

2.

Change codes on transmitter and

 

 

 

 

frequency.

 

receiver units.

 

 

 

 

 

 

 

 

 

Technical Service

Please call 1-800-858-8501 (English speaking only) for assistance before returning product to store.

If you experience a problem, follow this guide. You may also want to visit our Web site at: www.hzsupport.com. If the problem persists, call* for assistance at 1-800-858-8501(English speaking only), 7:30 AM to 4:30 PM CST (M-F). You may also write* to:

HeathCo LLC

P.O. Box 90004, Bowling Green, KY 42102-9004 ATTN: Technical Service

*If contacting Technical Service, please have the following information available: Model Number, Date of Purchase, and Place of Purchase.

No Service Parts Available for this Product

Regulatory Information

This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met.

The user is cautioned that changes or modifications not expressly approved by the party responsible for regulatory compliance could void the user’s authority to operate the equipment.

598-1116-10

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Example 1 Code Settings, System FeaturesCode Settings Example 2 Code Settings, SystemIndoor Plug-In Converter Code Switch LocationsRemote Control Add-A-Switch Entry Switch Lamp Socket Converter FloodlightFunction Controls Remote ControlRear View of Remote Control Optional Car Visor Clip IncludedAdd-A-Switch Removing Battery Tab Add-A-SwitchInstallation Battery ReplacementImportant Considerations Entry SwitchMounting Configurations and Possible Directions Movement Battery ReplacementBattery Compartment Indoor and outdoor Wireless Motion SensorSelect Night or 24 Hour Mode Installing BatteriesCheck Operation and Adjustment Installing Indoor Motion Sensor Directly To WallInstalling Outdoor Motion Sensor Motion Sensor Controls Adjusting Outdoor Motion Sensor CoverageOutdoor Motion Sensor Coverage Area Indoor and Outdoor Motion Sensor SensitivitySpeaker Receiver InformationIndoor Plug-In Converter Lamp socket converterFloodlight Install fixture in accordance with local codesJunction box ground wire to green Ground screw on fixture Wiring FloodlightRegulatory Information Troubleshooting GuideTechnical Service No Service Parts Available for this ProductTWO Year Limited Warranty Ejemplo 2 Calibraciones del código, sistema CaracteristicasCalibraciones DEL Código Ejemplo 1 Calibraciones del código, sistemaConvertidor enchufable para usarse Bajo techo Ubicaciones DE LOS Interruptores DE Circuito ImpresoTornillo TapaVista posterior del control remoto Control remotoPresilla opcional del visor del carro incluida Controles de las funcionesReemplazo de la batería Interruptor a añadibleInstalación OperaciónConsideraciones importantes Interruptor DE EntradaCompartimento de la batería Seleccione modo nocturno o modo de 24 horasInstalación de las baterías ControlTornillo de Montaje De montajeTornillo de la Abrazadera Montura giratoria de bola MovimientoDetector de movimiento para uso exterior Los controles Instalación del detector de movimiento para uso ExteriorRevisión de la operación y de la regulación Instalación del detector de movimientoApunte el detector Controles del detector de movimientoUbicación de los controles Información DEL ReceptorConvertidor enchufable para Usarse bajo techo Convertidor del zócalo de la LámparaCableado del reflector ReflectorNegro EmpaqueNo hay piezas de servicio disponibles para este producto Guía de Análisis de AveríasServicio Técnico Información RegulatoriaGarantía Limitada a 2 Años Exemple 2 Réglage des codes, système CaractéristiquesRéglage DES Codes Exemple 1 Réglage des codes, SystemTélécommande Interrupteur d’appoint Interrupteur d’entrée Emplacement DES MICRO-INTERRUPTEURSPince de pare-soleil d’automobile facultative Comprise TélécommandeCommandes des fonctions Vue arrière de la télécommandeRetrait de l’onglet de la pile Remplacement de la pileInterrupteur d’appoint FonctionnementDétails importants Interrupteur D’ENTRÉETournevis plat Retrait de l’onglet de pileCompartiment des piles Sélection du mode de nuit ou du mode 24 heuresInstallation des piles Détecteurs DE Mouvement Sans FIL Intérieurs ET ExtérieursDétecteur de Important Serrer à la main seulement, ne pas trop serrerVérification du fonctionnement et du réglage Installation du détecteur de mouvements extérieurInstallation du détecteur de mouvement Commandes du détecteur de mouvementMouvementMouvement Zone de couverture du détecteur de mouvements intérieurZone de couverture du détecteur de mouvements extérieur Haut-parleur Informations SUR LE RécepteurConvertisseur enfichable intérieur Convertisseur de douille ’ampouleCâblage du projecteur ProjecteurNoir à noir Aucune pièce de rechange n’est disponible pour ce produit Service TechniqueGuide DE Dépannage Renseignements de règlementsGarantie Limitée DE 2 ANS Çais fran 598-1116-10

598-1116-10 specifications

The Heath Zenith 598-1116-10 is an advanced motion-sensing outdoor light designed to enhance security and functionality around homes and businesses. This fixture is engineered with the latest technologies to provide reliable performance while ensuring energy efficiency and ease of use.

One of the main features of the 598-1116-10 is its state-of-the-art motion sensor. The device employs a passive infrared (PIR) technology that detects movement within a significant range, ensuring that any motion in its monitored area triggers the light. The sensor is adjustable, allowing users to customize the detection range and sensitivity to suit their specific environment. This adaptability is crucial for minimizing false alarms from unwarranted movements, such as passing cars or animals.

In addition to its motion-detection capabilities, the Heath Zenith 598-1116-10 offers various lighting options. The fixture is equipped with a powerful LED light source that produces a bright output while consuming less energy than traditional incandescent bulbs. This not only aids in lowering electricity costs but also contributes to a longer lifespan for the light, reducing the frequency and hassle of bulb replacements.

The design of the 598-1116-10 reflects both aesthetic appeal and functional robustness. The weather-resistant construction ensures that the light can withstand various climatic conditions, making it suitable for installation in different outdoor environments. The sleek and modern design complements a wide range of architectural styles, enhancing the property’s overall curb appeal.

Another important characteristic of this outdoor security light is its convenient operating features. The device includes a manual override option, allowing homeowners to keep the light on continuously for extended periods when needed, such as during gatherings or outdoor events. Additionally, the light can be set to operate on a timer, providing flexibility and control over illumination schedules.

In conclusion, the Heath Zenith 598-1116-10 stands out in the outdoor lighting market due to its motion-sensing technology, energy-efficient LED lighting, durable design, and user-friendly features. It serves not only as a means of illumination but also as a crucial security element, helping to deter potential intruders while offering peace of mind for property owners. This combination of practicality and style makes the 598-1116-10 a top choice for those looking to enhance their outdoor lighting system.
Top Page Image Contents