Heath Zenith 598-1116-10 Receiver Information, Indoor Plug-In Converter, Lamp socket converter

Page 9

Receiver Information

All receivers have the following features and ratings:

Rated for 120VAC/60Hz supply voltage.

Light can be dimmed when used with remote control (OFF, 5 Selectable Dim Levels from Dimmest to Brightest, Full On).

Remembers last selected dim setting.

Not for use with Compact Fluorescent bulbs.

When first turned on wait 15 seconds.

Indoor Plug-In Converter

Features and Ratings:

• Up to 300 Watt maximum incandescent load.

• No wiring required.

1. Plug in indoor receiver.

2. Plug in light you wish to control.

Caution: Do not exceed the maximum load limits listed above.

3.Check operation. Activate transmitter being used with receiver (see transmitter instructions).Asignal will be sent to the receiver to turn the receiver ON or OFF.

4.Using Remote By-Pass Switch. These receivers are equipped with a remote by-pass switch. This switch allows the user to select between AUTO and MANUAL modes. AUTO mode allows the light to be operated by remote control or remote motion sensor. MANUAL mode allows the plugged in light to be operated manually.

5.Adjust audio alert volume (if applicable). Some models are equipped with an audible alarm. The alarm sounds only when the receiver is activated by the wireless motion sensor and entry switch. The alarm volume is adjusted by the thumbwheel on the side of the receiver unit.

Remote

Remote

By-Pass

By-Pass

Switch

Switch

 

Alarm Volume

Speaker

Control

Control Locations

 

Lamp socket converter

Features and Ratings:

• Up to 150 Watt maximum incandescent load.

• No wiring required.

1.Screw module into light socket.

2.Screw incandescent bulb up to rated wattage into module.

Caution: Do not exceed the maximum load limits listed above.

3.Checkoperation.Activate transmitter being used with receiver (see transmitter instructions). A signal will be sent to the receiver to turn the receiver ON or OFF.

ENGLISH

598-1116-10

Image 9
Contents Code Settings FeaturesExample 2 Code Settings, System Example 1 Code Settings, SystemRemote Control Add-A-Switch Entry Switch Code Switch LocationsLamp Socket Converter Floodlight Indoor Plug-In ConverterRear View of Remote Control Remote ControlOptional Car Visor Clip Included Function ControlsInstallation Add-A-SwitchBattery Replacement Add-A-Switch Removing Battery TabMounting Configurations and Possible Directions Movement Entry SwitchBattery Replacement Important ConsiderationsSelect Night or 24 Hour Mode Indoor and outdoor Wireless Motion SensorInstalling Batteries Battery CompartmentInstalling Indoor Motion Sensor Directly To Wall Installing Outdoor Motion SensorCheck Operation and Adjustment Outdoor Motion Sensor Coverage Area Adjusting Outdoor Motion Sensor CoverageIndoor and Outdoor Motion Sensor Sensitivity Motion Sensor ControlsIndoor Plug-In Converter Receiver InformationLamp socket converter SpeakerJunction box ground wire to green Ground screw on fixture Install fixture in accordance with local codesWiring Floodlight FloodlightTechnical Service Troubleshooting GuideNo Service Parts Available for this Product Regulatory InformationTWO Year Limited Warranty Calibraciones DEL Código CaracteristicasEjemplo 1 Calibraciones del código, sistema Ejemplo 2 Calibraciones del código, sistemaTornillo Ubicaciones DE LOS Interruptores DE Circuito ImpresoTapa Convertidor enchufable para usarse Bajo techoPresilla opcional del visor del carro incluida Control remotoControles de las funciones Vista posterior del control remotoInstalación Interruptor a añadibleOperación Reemplazo de la bateríaConsideraciones importantes Interruptor DE EntradaInstalación de las baterías Seleccione modo nocturno o modo de 24 horasControl Compartimento de la bateríaTornillo de la Abrazadera Montura giratoria de bola De montajeMovimiento Tornillo de MontajeRevisión de la operación y de la regulación Instalación del detector de movimiento para uso ExteriorInstalación del detector de movimiento Detector de movimiento para uso exterior Los controlesApunte el detector Controles del detector de movimientoConvertidor enchufable para Usarse bajo techo Información DEL ReceptorConvertidor del zócalo de la Lámpara Ubicación de los controlesNegro ReflectorEmpaque Cableado del reflectorServicio Técnico Guía de Análisis de AveríasInformación Regulatoria No hay piezas de servicio disponibles para este productoGarantía Limitada a 2 Años Réglage DES Codes CaractéristiquesExemple 1 Réglage des codes, System Exemple 2 Réglage des codes, systèmeTélécommande Interrupteur d’appoint Interrupteur d’entrée Emplacement DES MICRO-INTERRUPTEURSCommandes des fonctions TélécommandeVue arrière de la télécommande Pince de pare-soleil d’automobile facultative CompriseInterrupteur d’appoint Remplacement de la pileFonctionnement Retrait de l’onglet de la pileTournevis plat Interrupteur D’ENTRÉERetrait de l’onglet de pile Détails importantsInstallation des piles Sélection du mode de nuit ou du mode 24 heuresDétecteurs DE Mouvement Sans FIL Intérieurs ET Extérieurs Compartiment des pilesDétecteur de Important Serrer à la main seulement, ne pas trop serrerInstallation du détecteur de mouvement Installation du détecteur de mouvements extérieurCommandes du détecteur de mouvement Vérification du fonctionnement et du réglageZone de couverture du détecteur de mouvements intérieur Zone de couverture du détecteur de mouvements extérieurMouvementMouvement Convertisseur enfichable intérieur Informations SUR LE RécepteurConvertisseur de douille ’ampoule Haut-parleurProjecteur Noir à noirCâblage du projecteur Guide DE Dépannage Service TechniqueRenseignements de règlements Aucune pièce de rechange n’est disponible pour ce produitGarantie Limitée DE 2 ANS Çais fran 598-1116-10

598-1116-10 specifications

The Heath Zenith 598-1116-10 is an advanced motion-sensing outdoor light designed to enhance security and functionality around homes and businesses. This fixture is engineered with the latest technologies to provide reliable performance while ensuring energy efficiency and ease of use.

One of the main features of the 598-1116-10 is its state-of-the-art motion sensor. The device employs a passive infrared (PIR) technology that detects movement within a significant range, ensuring that any motion in its monitored area triggers the light. The sensor is adjustable, allowing users to customize the detection range and sensitivity to suit their specific environment. This adaptability is crucial for minimizing false alarms from unwarranted movements, such as passing cars or animals.

In addition to its motion-detection capabilities, the Heath Zenith 598-1116-10 offers various lighting options. The fixture is equipped with a powerful LED light source that produces a bright output while consuming less energy than traditional incandescent bulbs. This not only aids in lowering electricity costs but also contributes to a longer lifespan for the light, reducing the frequency and hassle of bulb replacements.

The design of the 598-1116-10 reflects both aesthetic appeal and functional robustness. The weather-resistant construction ensures that the light can withstand various climatic conditions, making it suitable for installation in different outdoor environments. The sleek and modern design complements a wide range of architectural styles, enhancing the property’s overall curb appeal.

Another important characteristic of this outdoor security light is its convenient operating features. The device includes a manual override option, allowing homeowners to keep the light on continuously for extended periods when needed, such as during gatherings or outdoor events. Additionally, the light can be set to operate on a timer, providing flexibility and control over illumination schedules.

In conclusion, the Heath Zenith 598-1116-10 stands out in the outdoor lighting market due to its motion-sensing technology, energy-efficient LED lighting, durable design, and user-friendly features. It serves not only as a means of illumination but also as a crucial security element, helping to deter potential intruders while offering peace of mind for property owners. This combination of practicality and style makes the 598-1116-10 a top choice for those looking to enhance their outdoor lighting system.