Q-See QSD2216 manual Display Setup, Camera Name Set

Page 18

5.3 DISPLAY SETUP

5.3 DISPLAY SETUP

BOUND COLOR: Set the Color of Video Boundary (BLACK / WHITE / GRAY).

BLANK COLOR: Set the Background Color of Loss Video (BLACK / WHITE).

5.3.1 CAMERA NAME SET

When the cursor moves to Camera Name, please press the Enter button, the Camera Name Setup window will appear.

Press the up or down button to select channels, press the Enter button to change the channel name.

18

Image 18

Contents Page Safety Precautions About this documentWarranty and Service Strong recommendation on installation of the DVR unit Before reading this documentCONTENTS 1. FEATURE AND FUNCTION 2. UNIT DESCRIPTION OF FRONT PANEL 2.1 Recording/Playing Control Buttons Area2.2 Function Control Area 1. Auto/1 Auto key, in shift mode, press this button, The DVR will be in auto dwell state, it dwells according to the time set in auto sequence set menu, and you can set the dwell time of each channel. Press this button to quit this mode. If not in shift mode, press this button to see big picture of channel 1. While inputting numbers, this button is used as number key of “1” 3. REAR PANEL AND SYSTEM CONNECTION 2.3 Channel Choosing Control Area3.3 Alarm Connection 3.1 Back panel and connection terminals3.2 Video and Audio Connection Alarm output 3.4 Hard Disk Connection There are processing to install the hard disk4. REMOTE CONTROLLER 5. SYSTEM SETUP5.1 SETUP MENU Page 5.2 SYSTEM SETUP 5.2.1 TIME/DATA SET5.2.3 FACTORY RESET 5.2.2 HDD FORMAT SET5.2.4 Change Password 5.2.5 Firmware Update 5.3 DISPLAY SETUP 5.3.1 CAMERA NAME SET5.3.2 COLOR SET 5.4 RECORD SETUP 5.3.3. AUTO SEQUENCE SET5.4.1 AUDIO CH SET 5.5 NETWORK SETUP 5.4.2 REC CH SET5.5.1. N/W ENABLE SET 5.6 SENSOR SETUP 5.5.2. MAC SET5.6.1 Motion Detection settings 1 When surveying nearby objects 2-10 meters2 When surveying objects in 50-100 meters area 5.6.2 MOTION AREA SET 5.8 USB BACKUP 5.7 SCHEDULE SET5.9 STORAGE INFO 5.10 PTZ SET6.2 Turn off the DVR 6. Quick User Guideline6.1 Start the DVR 6.3 Normal Recording6.4 Alarm Recording 6.5 Time Recording6.6 Playback 6.7 Search Play 6.8 Time Search 6.9 Event Search6.10 Record Search 6.11 USB Backup 6.12 USB Update 6.13 Zoom Operation6.14 Information Display 6.15 PTZ OperationPress the PTZ button one more time to exit from PTZ control 7. USING THE NETWORK VIEWER 6.16 REMOTE CONTROLLERPlease click button, you will see the window below 7.1 Setting7.2 Viewer connect Enter the IP address and click “OK” button7.3 Live play 7.4 Playback7.5 Scandisk 7.6 File Play7.7 Save to AVI 7.8 Save to DVR 7.9 PTZ Control8. Main standard & parameter chart 9. Trouble shooting guide Q. I press record button, but the DVR does not start recording, why? A. Please stop record or play before you access these menuQ. Why cannot I access Network Set menu? Q. There is a movement, but the DVR does not start recordingRec rate field/sec Resolution10. Record Time Table Picture quality11. Internet View/Playback Configurations 11.2 Network Configurations11.1 About Networks Page Page Q-SEE Product Warranty Customer Information Card User’s NameMr./Mrs Company Name Postal Address Postal code Phone Number E-mail Model Number of ProductSerial Number of Product Purchase Date Distributor