Q-See QSD2216 Record Time Table, Rec rate field/sec, Picture quality, Resolution, Recording time

Page 47

Q. How do I change the On Screen Display (OSD) language on the DVR?

A. You can change the OSD language from the default English to German, French, Italian, Polish, or Spanish by following the steps below.

To change the OSD language, enter the menu system by pressing the MENU button on the front of the DVR and correctly input your password.

Highlight the “SYSTEM SET” option, and press the ENTER button.

Select “ LANGUAGE SET” and press the ENTER button.

Press the LEFT or RIGHT buttons to change the language and press the ENTER button to select your language.

Now fully exit the menu system and restart your DVR.

10. Record Time Table

Rec rate field/sec

Picture quality

Resolution

Recording time

 

 

 

 

60 fps

Very high

720

47 hours

 

 

 

 

60 fps

Low

720

125 hours

 

 

 

 

120 fps

Normal

360

47 hours

 

 

 

 

1 fps

Normal

720

4500 hours

 

 

 

 

Note: The above figures are from our test with a 250GB hard disk. Just for users’ reference. Different definition and stabilization (objects’ movement) of the images will make some kind of different results.

47

Image 47
Contents Page Warranty and Service Safety PrecautionsAbout this document Before reading this document Strong recommendation on installation of the DVR unitCONTENTS 1. FEATURE AND FUNCTION 2.2 Function Control Area 2. UNIT DESCRIPTION OF FRONT PANEL2.1 Recording/Playing Control Buttons Area 1. Auto/1 Auto key, in shift mode, press this button, The DVR will be in auto dwell state, it dwells according to the time set in auto sequence set menu, and you can set the dwell time of each channel. Press this button to quit this mode. If not in shift mode, press this button to see big picture of channel 1. While inputting numbers, this button is used as number key of “1” 2.3 Channel Choosing Control Area 3. REAR PANEL AND SYSTEM CONNECTION3.2 Video and Audio Connection 3.3 Alarm Connection3.1 Back panel and connection terminals Alarm output There are processing to install the hard disk 3.4 Hard Disk Connection5.1 SETUP MENU 4. REMOTE CONTROLLER5. SYSTEM SETUP Page 5.2.1 TIME/DATA SET 5.2 SYSTEM SETUP5.2.2 HDD FORMAT SET 5.2.3 FACTORY RESET5.2.4 Change Password 5.2.5 Firmware Update 5.3.1 CAMERA NAME SET 5.3 DISPLAY SETUP5.3.2 COLOR SET 5.3.3. AUTO SEQUENCE SET 5.4 RECORD SETUP5.4.1 AUDIO CH SET 5.4.2 REC CH SET 5.5 NETWORK SETUP5.5.1. N/W ENABLE SET 5.5.2. MAC SET 5.6 SENSOR SETUP2 When surveying objects in 50-100 meters area 5.6.1 Motion Detection settings1 When surveying nearby objects 2-10 meters 5.6.2 MOTION AREA SET 5.7 SCHEDULE SET 5.8 USB BACKUP5.10 PTZ SET 5.9 STORAGE INFO6.3 Normal Recording 6. Quick User Guideline6.1 Start the DVR 6.2 Turn off the DVR6.6 Playback 6.4 Alarm Recording6.5 Time Recording 6.7 Search Play 6.9 Event Search 6.8 Time Search6.10 Record Search 6.11 USB Backup 6.13 Zoom Operation 6.12 USB Update6.15 PTZ Operation 6.14 Information DisplayPress the PTZ button one more time to exit from PTZ control 6.16 REMOTE CONTROLLER 7. USING THE NETWORK VIEWEREnter the IP address and click “OK” button 7.1 Setting7.2 Viewer connect Please click button, you will see the window below7.4 Playback 7.3 Live play7.6 File Play 7.5 Scandisk7.7 Save to AVI 7.9 PTZ Control 7.8 Save to DVR8. Main standard & parameter chart 9. Trouble shooting guide Q. There is a movement, but the DVR does not start recording A. Please stop record or play before you access these menuQ. Why cannot I access Network Set menu? Q. I press record button, but the DVR does not start recording, why?Picture quality Resolution10. Record Time Table Rec rate field/sec11.1 About Networks 11. Internet View/Playback Configurations11.2 Network Configurations Page Page Q-SEE Product Warranty Serial Number of Product Purchase Date Distributor Customer Information Card User’s NameMr./Mrs Company Name PostalAddress Postal code Phone Number E-mail Model Number of Product