Q-See QSD2216 manual Record Setup, Auto Sequence Set

Page 20

5.3.3. AUTO SEQUENCE SET

5.3.3. AUTO SEQUENCE SET

When the cursor moves to Autoseq Set, please press enter button, the Auto Sequence Setup window will appear.

Press the UP or DOWN button to select channel, press LEFT or RIGHT button to change the auto Sequence time.

5.4 RECORD SETUP

When the cursor moves to Record Set, then press the Enter button, the Record Setup window will

appear, which is illustrated as below. Press UP or DOWN button to move the cursor. Then press

the LEFT or RIGHT button to change the value. While the DVR is in recording or playback mode,

you cannot access this menu unless you stop record or play first.

OVER WRITE: if set to “YES”, the DVR will automatically overwrite the HDD from the beginning when the HDD is full. If set to “NO”, the DVR will automatically stop recording when the HDD is full. If there are two HDD in the DVR, when the MASTER HDD is full, the video will store to the SLAVE HDD, and when the SLAVE HDD is also full, the DVR will overwrite the MASTER HDD if set this to “YES”, otherwise it will stop recording.

20

Image 20

Contents Page Warranty and Service Safety PrecautionsAbout this document Strong recommendation on installation of the DVR unit Before reading this documentCONTENTS 1. FEATURE AND FUNCTION 2.2 Function Control Area 2. UNIT DESCRIPTION OF FRONT PANEL2.1 Recording/Playing Control Buttons Area 1. Auto/1 Auto key, in shift mode, press this button, The DVR will be in auto dwell state, it dwells according to the time set in auto sequence set menu, and you can set the dwell time of each channel. Press this button to quit this mode. If not in shift mode, press this button to see big picture of channel 1. While inputting numbers, this button is used as number key of “1” 3. REAR PANEL AND SYSTEM CONNECTION 2.3 Channel Choosing Control Area3.2 Video and Audio Connection 3.3 Alarm Connection3.1 Back panel and connection terminals Alarm output 3.4 Hard Disk Connection There are processing to install the hard disk5.1 SETUP MENU 4. REMOTE CONTROLLER5. SYSTEM SETUP Page 5.2 SYSTEM SETUP 5.2.1 TIME/DATA SET5.2.3 FACTORY RESET 5.2.2 HDD FORMAT SET5.2.4 Change Password 5.2.5 Firmware Update 5.3 DISPLAY SETUP 5.3.1 CAMERA NAME SET5.3.2 COLOR SET 5.4 RECORD SETUP 5.3.3. AUTO SEQUENCE SET5.4.1 AUDIO CH SET 5.5 NETWORK SETUP 5.4.2 REC CH SET5.5.1. N/W ENABLE SET 5.6 SENSOR SETUP 5.5.2. MAC SET2 When surveying objects in 50-100 meters area 5.6.1 Motion Detection settings1 When surveying nearby objects 2-10 meters 5.6.2 MOTION AREA SET 5.8 USB BACKUP 5.7 SCHEDULE SET5.9 STORAGE INFO 5.10 PTZ SET6. Quick User Guideline 6.1 Start the DVR6.2 Turn off the DVR 6.3 Normal Recording6.6 Playback 6.4 Alarm Recording6.5 Time Recording 6.7 Search Play 6.8 Time Search 6.9 Event Search6.10 Record Search 6.11 USB Backup 6.12 USB Update 6.13 Zoom Operation6.14 Information Display 6.15 PTZ OperationPress the PTZ button one more time to exit from PTZ control 7. USING THE NETWORK VIEWER 6.16 REMOTE CONTROLLER7.1 Setting 7.2 Viewer connectPlease click button, you will see the window below Enter the IP address and click “OK” button7.3 Live play 7.4 Playback7.5 Scandisk 7.6 File Play7.7 Save to AVI 7.8 Save to DVR 7.9 PTZ Control8. Main standard & parameter chart 9. Trouble shooting guide A. Please stop record or play before you access these menu Q. Why cannot I access Network Set menu?Q. I press record button, but the DVR does not start recording, why? Q. There is a movement, but the DVR does not start recordingResolution 10. Record Time TableRec rate field/sec Picture quality11.1 About Networks 11. Internet View/Playback Configurations11.2 Network Configurations Page Page Q-SEE Product Warranty Serial Number of Product Purchase Date Distributor Customer Information Card User’s NameMr./Mrs Company Name PostalAddress Postal code Phone Number E-mail Model Number of Product