Q-See QSD2216 manual Search Play

Page 31

6.7 Search Play

recording is playing to see faster playback. Press the PLAY button to return to normal speed playing from the current place.

Continuous pressing of the FWD button will change the fast-forward between four levels of speed (X2, X4, X8, X16,) in sequence. Continuously pressing the REW button will change the fast backward playback between four levels of speed (X2, X4, X8, X16) in sequence.

During playback mode, press the Single Frame Forward button to play a frame at a time, and hold the button in to continually play one frame at time while the button is hold.

During playback mode, press the Single Frame Rewind button to play back a frame at a time, and hold the button in to continually play one frame at time while the button is hold.

Press the PLAY button again to resume normal playback speed, or press the STOP button to stop playing.

6.7 Search Play

Press the search button to display the Search play window on the screen.

TIME SEARCH: search recording by the time entered.

EVENT SEARCH: search recording by event list.

RECORD SEARCH: search recording by segment.

Press the UP or DOWN button to move cursor, then press Enter button to enter sub menu you

have highlighted. Press the Search button again to quit from search menu.

31

Image 31

Contents Page About this document Safety PrecautionsWarranty and Service Before reading this document Strong recommendation on installation of the DVR unitCONTENTS 1. FEATURE AND FUNCTION 2.1 Recording/Playing Control Buttons Area 2. UNIT DESCRIPTION OF FRONT PANEL2.2 Function Control Area 1. Auto/1 Auto key, in shift mode, press this button, The DVR will be in auto dwell state, it dwells according to the time set in auto sequence set menu, and you can set the dwell time of each channel. Press this button to quit this mode. If not in shift mode, press this button to see big picture of channel 1. While inputting numbers, this button is used as number key of “1” 2.3 Channel Choosing Control Area 3. REAR PANEL AND SYSTEM CONNECTION3.1 Back panel and connection terminals 3.3 Alarm Connection3.2 Video and Audio Connection Alarm output There are processing to install the hard disk 3.4 Hard Disk Connection5. SYSTEM SETUP 4. REMOTE CONTROLLER5.1 SETUP MENU Page 5.2.1 TIME/DATA SET 5.2 SYSTEM SETUP5.2.2 HDD FORMAT SET 5.2.3 FACTORY RESET5.2.4 Change Password 5.2.5 Firmware Update 5.3.1 CAMERA NAME SET 5.3 DISPLAY SETUP5.3.2 COLOR SET 5.3.3. AUTO SEQUENCE SET 5.4 RECORD SETUP5.4.1 AUDIO CH SET 5.4.2 REC CH SET 5.5 NETWORK SETUP5.5.1. N/W ENABLE SET 5.5.2. MAC SET 5.6 SENSOR SETUP1 When surveying nearby objects 2-10 meters 5.6.1 Motion Detection settings2 When surveying objects in 50-100 meters area 5.6.2 MOTION AREA SET 5.7 SCHEDULE SET 5.8 USB BACKUP5.10 PTZ SET 5.9 STORAGE INFO6.3 Normal Recording 6. Quick User Guideline6.1 Start the DVR 6.2 Turn off the DVR6.5 Time Recording 6.4 Alarm Recording6.6 Playback 6.7 Search Play 6.9 Event Search 6.8 Time Search6.10 Record Search 6.11 USB Backup 6.13 Zoom Operation 6.12 USB Update6.15 PTZ Operation 6.14 Information DisplayPress the PTZ button one more time to exit from PTZ control 6.16 REMOTE CONTROLLER 7. USING THE NETWORK VIEWEREnter the IP address and click “OK” button 7.1 Setting7.2 Viewer connect Please click button, you will see the window below7.4 Playback 7.3 Live play7.6 File Play 7.5 Scandisk7.7 Save to AVI 7.9 PTZ Control 7.8 Save to DVR8. Main standard & parameter chart 9. Trouble shooting guide Q. There is a movement, but the DVR does not start recording A. Please stop record or play before you access these menuQ. Why cannot I access Network Set menu? Q. I press record button, but the DVR does not start recording, why?Picture quality Resolution10. Record Time Table Rec rate field/sec11.2 Network Configurations 11. Internet View/Playback Configurations11.1 About Networks Page Page Q-SEE Product Warranty Address Postal code Phone Number E-mail Model Number of Product Customer Information Card User’s NameMr./Mrs Company Name PostalSerial Number of Product Purchase Date Distributor