Q-See QSD2216 manual Information Display, PTZ Operation

Page 36
6.14 Information Display

6.14 Information Display

In shift mode, press display button, the main information of the DVR will display on screen.

HDD SIZE: the size of the hard disk

HDD USED: the used space of the hard disk.

HDD READ: current HDD address for playback

OVERWRITE: overwrite time of the HDD

NETWORK IP: IP address of the DVR.

REC LIST: number of record list

EVENT LIST: number of event list

REC OVER: record list overwrite or not

EVENT OVER: event list overwrite or not.

S/W VER: software version

6.15 PTZ Operation

This DVR can control all speed domes which are connected to the DVR.

To control the speed dome, make sure all the lines are correctly connected, first you must set the right protocol, baud rate, and speed dome’s address for each speed dome, please refer to protocol set. For example, you connect the first speed dome to channel one, you should make sure that the baud rate, the protocol, and speed dome’s address is the same as the speed dome you connect to the channel. Press the PTZ button on the front panel or remote controller, “PTZ” will be displayed on the screen, then select 1 to 16 to choose PTZ channel, the channel number will be displayed after “PTZ”, please refer to the picture below:

36

Image 36
Contents Page Safety Precautions About this documentWarranty and Service Strong recommendation on installation of the DVR unit Before reading this documentCONTENTS 1. FEATURE AND FUNCTION 2. UNIT DESCRIPTION OF FRONT PANEL 2.1 Recording/Playing Control Buttons Area2.2 Function Control Area 1. Auto/1 Auto key, in shift mode, press this button, The DVR will be in auto dwell state, it dwells according to the time set in auto sequence set menu, and you can set the dwell time of each channel. Press this button to quit this mode. If not in shift mode, press this button to see big picture of channel 1. While inputting numbers, this button is used as number key of “1” 3. REAR PANEL AND SYSTEM CONNECTION 2.3 Channel Choosing Control Area3.3 Alarm Connection 3.1 Back panel and connection terminals3.2 Video and Audio Connection Alarm output 3.4 Hard Disk Connection There are processing to install the hard disk4. REMOTE CONTROLLER 5. SYSTEM SETUP5.1 SETUP MENU Page 5.2 SYSTEM SETUP 5.2.1 TIME/DATA SET5.2.3 FACTORY RESET 5.2.2 HDD FORMAT SET5.2.4 Change Password 5.2.5 Firmware Update 5.3 DISPLAY SETUP 5.3.1 CAMERA NAME SET5.3.2 COLOR SET 5.4 RECORD SETUP 5.3.3. AUTO SEQUENCE SET5.4.1 AUDIO CH SET 5.5 NETWORK SETUP 5.4.2 REC CH SET5.5.1. N/W ENABLE SET 5.6 SENSOR SETUP 5.5.2. MAC SET5.6.1 Motion Detection settings 1 When surveying nearby objects 2-10 meters2 When surveying objects in 50-100 meters area 5.6.2 MOTION AREA SET 5.8 USB BACKUP 5.7 SCHEDULE SET5.9 STORAGE INFO 5.10 PTZ SET6. Quick User Guideline 6.1 Start the DVR6.2 Turn off the DVR 6.3 Normal Recording6.4 Alarm Recording 6.5 Time Recording6.6 Playback 6.7 Search Play 6.8 Time Search 6.9 Event Search6.10 Record Search 6.11 USB Backup 6.12 USB Update 6.13 Zoom Operation6.14 Information Display 6.15 PTZ OperationPress the PTZ button one more time to exit from PTZ control 7. USING THE NETWORK VIEWER 6.16 REMOTE CONTROLLER7.1 Setting 7.2 Viewer connectPlease click button, you will see the window below Enter the IP address and click “OK” button7.3 Live play 7.4 Playback7.5 Scandisk 7.6 File Play7.7 Save to AVI 7.8 Save to DVR 7.9 PTZ Control8. Main standard & parameter chart 9. Trouble shooting guide A. Please stop record or play before you access these menu Q. Why cannot I access Network Set menu?Q. I press record button, but the DVR does not start recording, why? Q. There is a movement, but the DVR does not start recordingResolution 10. Record Time TableRec rate field/sec Picture quality11. Internet View/Playback Configurations 11.2 Network Configurations11.1 About Networks Page Page Q-SEE Product Warranty Customer Information Card User’s NameMr./Mrs Company Name Postal Address Postal code Phone Number E-mail Model Number of ProductSerial Number of Product Purchase Date Distributor