Q-See QSD2216 manual Time Search, Event Search

Page 32

6.8 Time Search

6.8 Time Search

Move the cursor to Time Search, then press the Enter button and the Time search window will

appear, which is illustrated as below.

The red block below the number means there is recorded video at that time.

Press the LEFT and RIGHT buttons to move the cursor along the year, month, day, hour and

minutes.

Please note: You can only view footage that has been recorded. Therefore you must select time

and dates that have a red block below them.

6.9 Event Search

Move the cursor to Event Search, and then press the Enter button, the event search window will appear, which is illustrated as below.

There are four types of event on this list: MOTION, ALARM, SCHEDULE and NETWORK. MOTION means motion triggered alarm recording.

ALARM means external sensor triggered alarm recording.

SCHEDULE means scheduled time recording.

NETWORK means network activated recording.

Press the UP and DOWN buttons to move the cursor along the event list, and press the Enter button to play the segment you selected. Press the search button to return to the Search menu.

32

Image 32

Contents Page Warranty and Service Safety PrecautionsAbout this document Strong recommendation on installation of the DVR unit Before reading this documentCONTENTS 1. FEATURE AND FUNCTION 2.2 Function Control Area 2. UNIT DESCRIPTION OF FRONT PANEL2.1 Recording/Playing Control Buttons Area 1. Auto/1 Auto key, in shift mode, press this button, The DVR will be in auto dwell state, it dwells according to the time set in auto sequence set menu, and you can set the dwell time of each channel. Press this button to quit this mode. If not in shift mode, press this button to see big picture of channel 1. While inputting numbers, this button is used as number key of “1” 3. REAR PANEL AND SYSTEM CONNECTION 2.3 Channel Choosing Control Area3.2 Video and Audio Connection 3.3 Alarm Connection3.1 Back panel and connection terminals Alarm output 3.4 Hard Disk Connection There are processing to install the hard disk5.1 SETUP MENU 4. REMOTE CONTROLLER5. SYSTEM SETUP Page 5.2 SYSTEM SETUP 5.2.1 TIME/DATA SET5.2.3 FACTORY RESET 5.2.2 HDD FORMAT SET5.2.4 Change Password 5.2.5 Firmware Update 5.3 DISPLAY SETUP 5.3.1 CAMERA NAME SET5.3.2 COLOR SET 5.4 RECORD SETUP 5.3.3. AUTO SEQUENCE SET5.4.1 AUDIO CH SET 5.5 NETWORK SETUP 5.4.2 REC CH SET5.5.1. N/W ENABLE SET 5.6 SENSOR SETUP 5.5.2. MAC SET2 When surveying objects in 50-100 meters area 5.6.1 Motion Detection settings1 When surveying nearby objects 2-10 meters 5.6.2 MOTION AREA SET 5.8 USB BACKUP 5.7 SCHEDULE SET5.9 STORAGE INFO 5.10 PTZ SET6. Quick User Guideline 6.1 Start the DVR6.2 Turn off the DVR 6.3 Normal Recording6.6 Playback 6.4 Alarm Recording6.5 Time Recording 6.7 Search Play 6.8 Time Search 6.9 Event Search6.10 Record Search 6.11 USB Backup 6.12 USB Update 6.13 Zoom Operation6.14 Information Display 6.15 PTZ OperationPress the PTZ button one more time to exit from PTZ control 7. USING THE NETWORK VIEWER 6.16 REMOTE CONTROLLER7.1 Setting 7.2 Viewer connectPlease click button, you will see the window below Enter the IP address and click “OK” button7.3 Live play 7.4 Playback7.5 Scandisk 7.6 File Play7.7 Save to AVI 7.8 Save to DVR 7.9 PTZ Control8. Main standard & parameter chart 9. Trouble shooting guide A. Please stop record or play before you access these menu Q. Why cannot I access Network Set menu?Q. I press record button, but the DVR does not start recording, why? Q. There is a movement, but the DVR does not start recordingResolution 10. Record Time TableRec rate field/sec Picture quality11.1 About Networks 11. Internet View/Playback Configurations11.2 Network Configurations Page Page Q-SEE Product Warranty Serial Number of Product Purchase Date Distributor Customer Information Card User’s NameMr./Mrs Company Name PostalAddress Postal code Phone Number E-mail Model Number of Product