Q-See QSD2216 manual Record Search

Page 33

6.10 Record Search

If you want to search from MASTER HDD to SLAVE HDD, press the SERACH button, and then press Enter button. Press the Menu button to exit.

6.10 Record Search

Move the cursor to the Record Search, press the Enter button, and the record search window will appear, which is illustrated as below.

All recorded segments are displayed here, press the up or down button to move the cursor along the segment list, press left or right buttons to see previous or next page, press the Enter button to play the segment you selected. Press search button again to return to the Search Play menu.

33

Image 33

Contents Page Safety Precautions About this documentWarranty and Service Before reading this document Strong recommendation on installation of the DVR unitCONTENTS 1. FEATURE AND FUNCTION 2. UNIT DESCRIPTION OF FRONT PANEL 2.1 Recording/Playing Control Buttons Area2.2 Function Control Area 1. Auto/1 Auto key, in shift mode, press this button, The DVR will be in auto dwell state, it dwells according to the time set in auto sequence set menu, and you can set the dwell time of each channel. Press this button to quit this mode. If not in shift mode, press this button to see big picture of channel 1. While inputting numbers, this button is used as number key of “1” 2.3 Channel Choosing Control Area 3. REAR PANEL AND SYSTEM CONNECTION3.3 Alarm Connection 3.1 Back panel and connection terminals3.2 Video and Audio Connection Alarm output There are processing to install the hard disk 3.4 Hard Disk Connection4. REMOTE CONTROLLER 5. SYSTEM SETUP5.1 SETUP MENU Page 5.2.1 TIME/DATA SET 5.2 SYSTEM SETUP5.2.2 HDD FORMAT SET 5.2.3 FACTORY RESET5.2.4 Change Password 5.2.5 Firmware Update 5.3.1 CAMERA NAME SET 5.3 DISPLAY SETUP5.3.2 COLOR SET 5.3.3. AUTO SEQUENCE SET 5.4 RECORD SETUP5.4.1 AUDIO CH SET 5.4.2 REC CH SET 5.5 NETWORK SETUP5.5.1. N/W ENABLE SET 5.5.2. MAC SET 5.6 SENSOR SETUP5.6.1 Motion Detection settings 1 When surveying nearby objects 2-10 meters2 When surveying objects in 50-100 meters area 5.6.2 MOTION AREA SET 5.7 SCHEDULE SET 5.8 USB BACKUP5.10 PTZ SET 5.9 STORAGE INFO6.1 Start the DVR 6. Quick User Guideline6.2 Turn off the DVR 6.3 Normal Recording6.4 Alarm Recording 6.5 Time Recording6.6 Playback 6.7 Search Play 6.9 Event Search 6.8 Time Search6.10 Record Search 6.11 USB Backup 6.13 Zoom Operation 6.12 USB Update6.15 PTZ Operation 6.14 Information DisplayPress the PTZ button one more time to exit from PTZ control 6.16 REMOTE CONTROLLER 7. USING THE NETWORK VIEWER7.2 Viewer connect 7.1 SettingPlease click button, you will see the window below Enter the IP address and click “OK” button7.4 Playback 7.3 Live play7.6 File Play 7.5 Scandisk7.7 Save to AVI 7.9 PTZ Control 7.8 Save to DVR8. Main standard & parameter chart 9. Trouble shooting guide Q. Why cannot I access Network Set menu? A. Please stop record or play before you access these menuQ. I press record button, but the DVR does not start recording, why? Q. There is a movement, but the DVR does not start recording10. Record Time Table ResolutionRec rate field/sec Picture quality11. Internet View/Playback Configurations 11.2 Network Configurations11.1 About Networks Page Page Q-SEE Product Warranty Customer Information Card User’s NameMr./Mrs Company Name Postal Address Postal code Phone Number E-mail Model Number of ProductSerial Number of Product Purchase Date Distributor