Q-See QSD2216 manual Hdd Format Set, Factory Reset

Page 15

5.2.2 HDD FORMAT SET

5.2.2 HDD FORMAT SET

Format the hard disk.

Select “YES”, to format the hard disk. And all video on the HDD will loss.

5.2.3 FACTORY RESET

Initialize all the setup; the DVR will reset to factory default settings.

15

Image 15

Contents Page Safety Precautions About this documentWarranty and Service Before reading this document Strong recommendation on installation of the DVR unitCONTENTS 1. FEATURE AND FUNCTION 2. UNIT DESCRIPTION OF FRONT PANEL 2.1 Recording/Playing Control Buttons Area2.2 Function Control Area 1. Auto/1 Auto key, in shift mode, press this button, The DVR will be in auto dwell state, it dwells according to the time set in auto sequence set menu, and you can set the dwell time of each channel. Press this button to quit this mode. If not in shift mode, press this button to see big picture of channel 1. While inputting numbers, this button is used as number key of “1” 2.3 Channel Choosing Control Area 3. REAR PANEL AND SYSTEM CONNECTION3.3 Alarm Connection 3.1 Back panel and connection terminals3.2 Video and Audio Connection Alarm output There are processing to install the hard disk 3.4 Hard Disk Connection4. REMOTE CONTROLLER 5. SYSTEM SETUP5.1 SETUP MENU Page 5.2.1 TIME/DATA SET 5.2 SYSTEM SETUP5.2.2 HDD FORMAT SET 5.2.3 FACTORY RESET5.2.4 Change Password 5.2.5 Firmware Update 5.3.1 CAMERA NAME SET 5.3 DISPLAY SETUP5.3.2 COLOR SET 5.3.3. AUTO SEQUENCE SET 5.4 RECORD SETUP5.4.1 AUDIO CH SET 5.4.2 REC CH SET 5.5 NETWORK SETUP5.5.1. N/W ENABLE SET 5.5.2. MAC SET 5.6 SENSOR SETUP5.6.1 Motion Detection settings 1 When surveying nearby objects 2-10 meters2 When surveying objects in 50-100 meters area 5.6.2 MOTION AREA SET 5.7 SCHEDULE SET 5.8 USB BACKUP5.10 PTZ SET 5.9 STORAGE INFO6.3 Normal Recording 6. Quick User Guideline6.1 Start the DVR 6.2 Turn off the DVR6.4 Alarm Recording 6.5 Time Recording6.6 Playback 6.7 Search Play 6.9 Event Search 6.8 Time Search6.10 Record Search 6.11 USB Backup 6.13 Zoom Operation 6.12 USB Update6.15 PTZ Operation 6.14 Information DisplayPress the PTZ button one more time to exit from PTZ control 6.16 REMOTE CONTROLLER 7. USING THE NETWORK VIEWEREnter the IP address and click “OK” button 7.1 Setting7.2 Viewer connect Please click button, you will see the window below7.4 Playback 7.3 Live play7.6 File Play 7.5 Scandisk7.7 Save to AVI 7.9 PTZ Control 7.8 Save to DVR8. Main standard & parameter chart 9. Trouble shooting guide Q. There is a movement, but the DVR does not start recording A. Please stop record or play before you access these menuQ. Why cannot I access Network Set menu? Q. I press record button, but the DVR does not start recording, why?Picture quality Resolution10. Record Time Table Rec rate field/sec11. Internet View/Playback Configurations 11.2 Network Configurations11.1 About Networks Page Page Q-SEE Product Warranty Customer Information Card User’s NameMr./Mrs Company Name Postal Address Postal code Phone Number E-mail Model Number of ProductSerial Number of Product Purchase Date Distributor