Q-See QSD2216 manual Hard Disk Connection, There are processing to install the hard disk

Page 11

3.4 Hard Disk Connection

3.4 Hard Disk Connection

There are processing to install the hard disk.

Note: If the DVR comes with a HDD pre-installed then skip the following steps.

1. Pull out the hard drive rack from DVR side panel.

2. Connect the DATA cable & power cord.

3. Open the top cover of the drawer.

4.Close the top cover of the drawer and put the hard drive drawer back into the

DVR

5. Lock the hard drive draw by turning the key clockwise.

If you have another HDD, please jump that HDD to SLAVE, and open then machine, put the HDD to the HDD rack, and then connect the power cord and DATA cable.

11

Image 11

Contents Page Warranty and Service Safety PrecautionsAbout this document Before reading this document Strong recommendation on installation of the DVR unitCONTENTS 1. FEATURE AND FUNCTION 2.2 Function Control Area 2. UNIT DESCRIPTION OF FRONT PANEL2.1 Recording/Playing Control Buttons Area 1. Auto/1 Auto key, in shift mode, press this button, The DVR will be in auto dwell state, it dwells according to the time set in auto sequence set menu, and you can set the dwell time of each channel. Press this button to quit this mode. If not in shift mode, press this button to see big picture of channel 1. While inputting numbers, this button is used as number key of “1” 2.3 Channel Choosing Control Area 3. REAR PANEL AND SYSTEM CONNECTION3.2 Video and Audio Connection 3.3 Alarm Connection3.1 Back panel and connection terminals Alarm output There are processing to install the hard disk 3.4 Hard Disk Connection5.1 SETUP MENU 4. REMOTE CONTROLLER5. SYSTEM SETUP Page 5.2.1 TIME/DATA SET 5.2 SYSTEM SETUP5.2.2 HDD FORMAT SET 5.2.3 FACTORY RESET5.2.4 Change Password 5.2.5 Firmware Update 5.3.1 CAMERA NAME SET 5.3 DISPLAY SETUP5.3.2 COLOR SET 5.3.3. AUTO SEQUENCE SET 5.4 RECORD SETUP5.4.1 AUDIO CH SET 5.4.2 REC CH SET 5.5 NETWORK SETUP5.5.1. N/W ENABLE SET 5.5.2. MAC SET 5.6 SENSOR SETUP2 When surveying objects in 50-100 meters area 5.6.1 Motion Detection settings1 When surveying nearby objects 2-10 meters 5.6.2 MOTION AREA SET 5.7 SCHEDULE SET 5.8 USB BACKUP5.10 PTZ SET 5.9 STORAGE INFO6.3 Normal Recording 6. Quick User Guideline6.1 Start the DVR 6.2 Turn off the DVR6.6 Playback 6.4 Alarm Recording6.5 Time Recording 6.7 Search Play 6.9 Event Search 6.8 Time Search6.10 Record Search 6.11 USB Backup 6.13 Zoom Operation 6.12 USB Update6.15 PTZ Operation 6.14 Information DisplayPress the PTZ button one more time to exit from PTZ control 6.16 REMOTE CONTROLLER 7. USING THE NETWORK VIEWEREnter the IP address and click “OK” button 7.1 Setting7.2 Viewer connect Please click button, you will see the window below7.4 Playback 7.3 Live play7.6 File Play 7.5 Scandisk7.7 Save to AVI 7.9 PTZ Control 7.8 Save to DVR8. Main standard & parameter chart 9. Trouble shooting guide Q. There is a movement, but the DVR does not start recording A. Please stop record or play before you access these menuQ. Why cannot I access Network Set menu? Q. I press record button, but the DVR does not start recording, why?Picture quality Resolution10. Record Time Table Rec rate field/sec11.1 About Networks 11. Internet View/Playback Configurations11.2 Network Configurations Page Page Q-SEE Product Warranty Serial Number of Product Purchase Date Distributor Customer Information Card User’s NameMr./Mrs Company Name PostalAddress Postal code Phone Number E-mail Model Number of Product