JA Audio 9902S manual Switching on for the first time with Scart connections

Page 11

INSTALLATION OF THE MEDIAMASTER

Switching on for the first time with SCART connections

•Plug in your Mediamaster

•Now you will see the ”Welcome” menu on the screen.

•Press OK on the Mediamaster remote control to start the In- stallation procedure.

You may now proceed to “First time installation”, see next page.

Tuning procedure when RF connections are used

This procedure is necessary if your Mediamaster is con- nected to the TV with an RF cable, and not via SCART.

To tune your TV to the RF signal you might also need your TV manual in addition to this manual. The steps below explain what to do if you have been unable to use SCART cables in your con- nection.

•Plug in your Mediamaster.

Tuning your TV to the Mediamaster

•Select a channel number on the TV that is not currently used for other TV channels.

•Follow the instructions in your TV manual to tune the TV chan- nel selector to UHF channel 43 (this is the Mediamaster’s fac- tory preset UHF channel). If you are already using this chan- nel, select another non occupied UHF channel between 21 to 69 on the TV.

•For example, if you select UHF channel 45 on your TV, you must change your Mediamaster to the same channel.

Use the or buttons on the front panel of the Mediamaster, or on the remote control, to change to the corresponding chan- nel. You will see the UHF channel number displayed on the front panel of the Mediamaster.

•When you have correctly changed the UHF channel number you will see the ”Welcome” menu on the TV screen.

If there is interference from other channels you will have to change the chosen UHF channel.

•Follow the instructions in your TV manual to store this UHF chan- nel as the channel used by your Mediamaster. You will have to select it when you want to watch digital TV/Radio channels.

•Once the welcome message is visible, press the OK button on the Mediamasters remote control to start the “First time installation” procedure, see next page.

If for some reason you have to change the RF channel later, you can do this by using the TV settings menu further on in this manual.

If you have a VCR connected it must be tuned to a different UHF channel (between 21 to 69) than the Mediamaster.

GB 11

Image 11

Contents Mediamaster Page Mediamaster 9902 S ContentsGeneral Information about the Mediamaster For Your SafetyImportant Information in the Event of Service + P Remote ControlPad Rear panel Front and Rear PanelFront panel CA module with its smartcard Viaccess smartcardOnly for services coded with the Viaccess CA system About the Smartcard and CA ModuleConnecting the Mediamaster to the dish Installation of the MediamasterPreparing the remote control If your TV has a Scart socket, but your VCR does not Connecting to the TVConnecting a TV and VCR GeneralConnecting to the built in phone modem Connecting an analogue satellite receiver and a VCRConnecting a HiFi system Tuning your TV to the Mediamaster Switching on for the first time with Scart connectionsTuning procedure when RF connections are used Language First Time InstallationGeneral information Welcome menuAlternatives 1-6 requires the use of a Universal LNBs RF modulator typeAntenna/satellite selection Line 1 through 4 on the antenna satel- lite selection menu Antenna adjustment and signal checkLine 5 and 6 on the antenna satellite selection menu Connection of a two port DiSEqC switchMultisatellite/mini DiSEqC One antenna/one LNB configurationLine 7 on the antenna satellite selection Menu Multisatellite/two port DiSEqC Automatic search Connection of a four port DiSEqC switchMultisatellite/four port DiSEqC Channel searchAdvanced search Motor antennaManual search Press OK Adjust motorType of motor First Time Installation Channel search progress Time adjustmentFinishing the first time installation Programme information Viewing ModeGuide I information buttonSubtitle language List of TV and radio channelsOptions green button Audio languageText button teletext TV releaseRecording from the hard disk to a video recorder Recording on an external analogue Video recorderAbout hard disk recording Hard Disk RecordingLocked functions during recording Different ways of making recordingsRecording menu To watch the pause recording Pause RecordingTo finish this example of a pause recording Normal recording Timer recordingPause during playback of a normal recording To start playback of a recordingPause function Handle Recording menu appearsFast Forward and Rewind of a pause recording in progress Watch the playback at a different speedSlow Motion function Small steps during playbackFind a specific position within a playback Edit function Play List of recordingsHandle recording Recording information RenameErase Add another recordingSave a recording as Erasable or Permanent Important about editing channels Main MenuTV and radio channels Edit channelsRearrange lists How to give a specific nameCreate list Rename listRename channels Select channelsLock channels To remove channels Rearrange channelsDelete channels Remove channelsUpdate channels via a PC Update channelsFor a fixed antenna System configurationEdit satellites To add a new satelliteWhen your antenna is controlled by a motor TV settings Antenna/Satellite configurationModem Setting Information about the modem Receiver upgradeReinstall Erase hard diskParental control Language preferencesAppearance preferences Repeat playing Recording preferencesMake new recordings Saved pause recordingsType of programme Erase before record hoursSystem information Receiver numberSystem information Following extreme exampleRelease info Conditional AccessViaccess embedded DiagnosticsCommon Interface CI Smartcard settingsTimer Timer setup Important information related to the timer recordingAGC Glossary of TermsProblem Possible causes What to do Problem SolvingFront Panel Display What to do if you can’t solve the problemSecurity information Technical Specifications0226