JA Audio 9902S manual 0226

Page 62

Important Information

Wiring the plug (UK and Eire only)

The mains lead on this product is already fitted with a non-rewireable (moulded) plug incorpo- rating a fuse, the value of which is indicated on the pin face of the plug.

Should the fuse need to be replaced, an ASTA or BSI approved BS 1362 of the same rating fuse must be used. If the fuse cover is detachable, always refit the cover after replacing the fuse.

NEVER use the plug with the fuse cover omitted. If the fitted plug is not suitable for your socket outlets, it should be cut off, after having first removed the fuse, and an appropriate plug fitted in its place. If this new plug contains a fuse, its value should be the same as that removed from the non-rewireable plug.

The severed plug must be destroyed immediately to avoid possible shock hazard. If you need to replace the mains plug, follow the instructions given below:

The wires in the mains lead are coloured in accordance with the following code: BLUE - Neutral (N):

BROWN - Live (L). As these colours may not correspond with the coloured markings identify- ing the terminals in your plug, proceed as follows:

The wire coloured BLUE must be connected to the terminal marked with the letter N or col- oured BLUE or BLACK.

The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED. On no account should either of these wires be connected to the terminal marked E or coloured GREEN or GREEN and YELLOW.

Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead: not simply over the two wires.

If in doubt, consult a qualified electrician.

Nokia and Nokia Connecting People are registered trademarks of Nokia Corporation

www.nokia.com

66 76986-18

© 0226

Image 62

Contents Mediamaster Page Contents Mediamaster 9902 SGeneral Information about the Mediamaster For Your SafetyImportant Information in the Event of Service + P Remote ControlPad Rear panel Front and Rear PanelFront panel About the Smartcard and CA Module Viaccess smartcardOnly for services coded with the Viaccess CA system CA module with its smartcardConnecting the Mediamaster to the dish Installation of the MediamasterPreparing the remote control General Connecting to the TVConnecting a TV and VCR If your TV has a Scart socket, but your VCR does notConnecting to the built in phone modem Connecting an analogue satellite receiver and a VCRConnecting a HiFi system Tuning your TV to the Mediamaster Switching on for the first time with Scart connectionsTuning procedure when RF connections are used Welcome menu First Time InstallationGeneral information LanguageAlternatives 1-6 requires the use of a Universal LNBs RF modulator typeAntenna/satellite selection Antenna adjustment and signal check Line 1 through 4 on the antenna satel- lite selection menuConnection of a two port DiSEqC switch Line 5 and 6 on the antenna satellite selection menuMultisatellite/mini DiSEqC One antenna/one LNB configurationLine 7 on the antenna satellite selection Menu Multisatellite/two port DiSEqC Channel search Connection of a four port DiSEqC switchMultisatellite/four port DiSEqC Automatic searchAdvanced search Motor antennaManual search Press OK Adjust motorType of motor First Time Installation Channel search progress Time adjustmentFinishing the first time installation Viewing Mode Programme informationI information button GuideAudio language List of TV and radio channelsOptions green button Subtitle languageTV release Text button teletextRecording on an external analogue Video recorder Recording from the hard disk to a video recorderHard Disk Recording About hard disk recordingLocked functions during recording Different ways of making recordingsRecording menu Pause Recording To watch the pause recordingTo finish this example of a pause recording Timer recording Normal recordingHandle Recording menu appears To start playback of a recordingPause function Pause during playback of a normal recordingWatch the playback at a different speed Fast Forward and Rewind of a pause recording in progressSlow Motion function Small steps during playbackFind a specific position within a playback Edit function Play List of recordingsHandle recording Add another recording RenameErase Recording informationSave a recording as Erasable or Permanent Edit channels Main MenuTV and radio channels Important about editing channelsRename list How to give a specific nameCreate list Rearrange listsRename channels Select channelsLock channels Remove channels Rearrange channelsDelete channels To remove channelsUpdate channels Update channels via a PCTo add a new satellite System configurationEdit satellites For a fixed antennaWhen your antenna is controlled by a motor Antenna/Satellite configuration TV settingsModem Setting Erase hard disk Receiver upgradeReinstall Information about the modemLanguage preferences Parental controlAppearance preferences Saved pause recordings Recording preferencesMake new recordings Repeat playingErase before record hours Type of programmeFollowing extreme example Receiver numberSystem information System informationDiagnostics Conditional AccessViaccess embedded Release infoCommon Interface CI Smartcard settingsTimer Important information related to the timer recording Timer setupGlossary of Terms AGCProblem Solving Problem Possible causes What to doWhat to do if you can’t solve the problem Front Panel DisplayTechnical Specifications Security information0226