JA Audio 9902S manual Line 1 through 4 on the antenna satel- lite selection menu

Page 14

FIRST TIME INSTALLATION

Line 1 through 4 on the antenna satel- lite selection menu

Select one of the alternatives ASTRA, HOTBIRD, SIRIUS or THOR when you have a single LNB pointed towards any of these satel- lites.

Pressing OK from the selected alternative will display the “An- tenna adjustment” menu (shown to the right) on the screen.

For each satellite, (e.g. ASTRA, HOTBIRD, SIRIUS, THOR), up to 4 different channels are preprogrammed and shown in the menu. When you adjust the antenna, your Mediamaster will use the marked channel to find signals from a satellite. (You can select

channel with the buttons.)

Antenna adjustment and signal check

•Adjust the antenna towards the desired satellite until you have a high value on the Signal strength (AGC) *) indicator (the red bar at the top of the menu) and on the Signal quality (SNR) in- dicator (the red, yellow and green bar at the top of the menu).

OK

If you do not get a picture, you may be tuned to an analogue sig- nal source. Another reason could also be that the antenna is po- sitioned towards the wrong satellite.

The reason could also be that the marked channel is not trans- mitting at the moment. If so, select one of the other prepro-

grammed channels with the buttons.

When you have picture from a TV channel, press OK. The Media- master automatically starts searching for and downloads chan- nels from the satellite. Please refer to page 21.

(If you have a good indication of the signal quality, but no picture from any of the channel alternatives, try proceeding with the channel search anyway by pressing OK).

*) About Signal strength (AGC) and Signal quality (SNR)

The different signal indicators at the top of the menu provide in- formation about two things:

AGC: The AGC, shown with a red bar, will indicate the average strength of any incoming signal, digital as well as analogue.

SNR: The SNR, shown with a red, yellow and green bar, will indicate the signal quality for the preprogrammed channel chosen.

GB 14

Image 14

Contents Mediamaster Page Contents Mediamaster 9902 SGeneral Information about the Mediamaster For Your SafetyImportant Information in the Event of Service + P Remote ControlPad Rear panel Front and Rear PanelFront panel About the Smartcard and CA Module Viaccess smartcardOnly for services coded with the Viaccess CA system CA module with its smartcardConnecting the Mediamaster to the dish Installation of the MediamasterPreparing the remote control General Connecting to the TVConnecting a TV and VCR If your TV has a Scart socket, but your VCR does notConnecting to the built in phone modem Connecting an analogue satellite receiver and a VCRConnecting a HiFi system Tuning your TV to the Mediamaster Switching on for the first time with Scart connectionsTuning procedure when RF connections are used Welcome menu First Time InstallationGeneral information LanguageAlternatives 1-6 requires the use of a Universal LNBs RF modulator typeAntenna/satellite selection Antenna adjustment and signal check Line 1 through 4 on the antenna satel- lite selection menuConnection of a two port DiSEqC switch Line 5 and 6 on the antenna satellite selection menuMultisatellite/mini DiSEqC One antenna/one LNB configurationLine 7 on the antenna satellite selection Menu Multisatellite/two port DiSEqC Channel search Connection of a four port DiSEqC switchMultisatellite/four port DiSEqC Automatic searchAdvanced search Motor antennaManual search Press OK Adjust motorType of motor First Time Installation Channel search progress Time adjustmentFinishing the first time installation Viewing Mode Programme informationI information button GuideAudio language List of TV and radio channelsOptions green button Subtitle languageTV release Text button teletextRecording on an external analogue Video recorder Recording from the hard disk to a video recorderHard Disk Recording About hard disk recordingLocked functions during recording Different ways of making recordingsRecording menu Pause Recording To watch the pause recordingTo finish this example of a pause recording Timer recording Normal recordingHandle Recording menu appears To start playback of a recordingPause function Pause during playback of a normal recordingWatch the playback at a different speed Fast Forward and Rewind of a pause recording in progressSlow Motion function Small steps during playbackFind a specific position within a playback Edit function Play List of recordingsHandle recording Add another recording RenameErase Recording informationSave a recording as Erasable or Permanent Edit channels Main MenuTV and radio channels Important about editing channelsRename list How to give a specific nameCreate list Rearrange listsRename channels Select channelsLock channels Remove channels Rearrange channelsDelete channels To remove channelsUpdate channels Update channels via a PCTo add a new satellite System configurationEdit satellites For a fixed antennaWhen your antenna is controlled by a motor Antenna/Satellite configuration TV settingsModem Setting Erase hard disk Receiver upgradeReinstall Information about the modemLanguage preferences Parental controlAppearance preferences Saved pause recordings Recording preferencesMake new recordings Repeat playingErase before record hours Type of programmeFollowing extreme example Receiver numberSystem information System informationDiagnostics Conditional AccessViaccess embedded Release infoCommon Interface CI Smartcard settingsTimer Important information related to the timer recording Timer setupGlossary of Terms AGCProblem Solving Problem Possible causes What to doWhat to do if you can’t solve the problem Front Panel DisplayTechnical Specifications Security information0226