JA Audio 9902S Line 7 on the antenna satellite selection Menu, One antenna/one LNB configuration

Page 16

FIRST TIME INSTALLATION

Line 7 on the antenna satellite selection Menu

This selection is necessary only when your satellite choice dif- fers from the preprogrammed satellite alternatives in the follow- ing ways;

•if you do not use an universal LNB

•when you have more than two LNB’s.

•You also must select this alternative when your antenna is con- trolled by motor (ref. to page 19.)

One antenna/one LNB configuration

Select this alternative if you have one (1) LNB mounted on the antenna and you want to select another preprogrammed satel- lite (than those from line 1-4.)

You also must select this alternative when you are not using an Universal LNB.

LNB type

Select the local oscillator (L. O.) frequency valid for the present LNB. The most common values, including Universal LNB, are

selectable with the buttons.

You can also enter a value with the numeric buttons when the symbol for the remote control is visible on the line.

LNB offset voltage

If the cable down from any of the LNB’s is very long, it might be necessary to increase the voltage to these LNB’s by 0,5 V.

In most cases nothing has to be altered here. Leave the default value “0 V” as it is. If the switch does not change between hori- zontal and vertical polarization, the voltage to a LNB can be in- creased later.

Increase the voltage:

a. only if a LNB does not change polarization

b. only to the specific LNB mentioned in a. above

Satellite

Select one of the preprogrammed satellites.

Predefined channel

Select one of the preprogrammed channels and adjust your an- tenna according to the “Antenna adjustment and signal check” section on page 14.

Multisatellite/mini DiSEqC

Select this alternative if you are using two LNBs that are control- led by a mini DiSEqC switch.

The selection of the different LNBs must be controlled by an external switch. Refer to page 15.

GB 16

OK

OK

OK

Please follow the procedure de- scribed on page 14.

Image 16

Contents Mediamaster Page Contents Mediamaster 9902 SImportant Information in the Event of Service For Your SafetyGeneral Information about the Mediamaster Pad Remote Control+ P Front panel Front and Rear PanelRear panel Viaccess smartcard Only for services coded with the Viaccess CA systemAbout the Smartcard and CA Module CA module with its smartcardPreparing the remote control Installation of the MediamasterConnecting the Mediamaster to the dish Connecting to the TV Connecting a TV and VCRGeneral If your TV has a Scart socket, but your VCR does notConnecting a HiFi system Connecting an analogue satellite receiver and a VCRConnecting to the built in phone modem Tuning procedure when RF connections are used Switching on for the first time with Scart connectionsTuning your TV to the Mediamaster First Time Installation General informationWelcome menu LanguageAntenna/satellite selection RF modulator typeAlternatives 1-6 requires the use of a Universal LNBs Antenna adjustment and signal check Line 1 through 4 on the antenna satel- lite selection menuConnection of a two port DiSEqC switch Line 5 and 6 on the antenna satellite selection menuLine 7 on the antenna satellite selection Menu One antenna/one LNB configurationMultisatellite/mini DiSEqC Multisatellite/two port DiSEqC Connection of a four port DiSEqC switch Multisatellite/four port DiSEqCChannel search Automatic searchManual search Motor antennaAdvanced search Type of motor Adjust motorPress OK First Time Installation Finishing the first time installation Time adjustmentChannel search progress Viewing Mode Programme informationI information button GuideList of TV and radio channels Options green buttonAudio language Subtitle languageTV release Text button teletextRecording on an external analogue Video recorder Recording from the hard disk to a video recorderHard Disk Recording About hard disk recordingRecording menu Different ways of making recordingsLocked functions during recording Pause Recording To watch the pause recordingTo finish this example of a pause recording Timer recording Normal recordingTo start playback of a recording Pause functionHandle Recording menu appears Pause during playback of a normal recordingWatch the playback at a different speed Fast Forward and Rewind of a pause recording in progressFind a specific position within a playback Small steps during playbackSlow Motion function Edit function Handle recording List of recordingsPlay Rename EraseAdd another recording Recording informationSave a recording as Erasable or Permanent Main Menu TV and radio channelsEdit channels Important about editing channelsHow to give a specific name Create listRename list Rearrange listsLock channels Select channelsRename channels Rearrange channels Delete channelsRemove channels To remove channelsUpdate channels Update channels via a PCSystem configuration Edit satellitesTo add a new satellite For a fixed antennaWhen your antenna is controlled by a motor Antenna/Satellite configuration TV settingsModem Setting Receiver upgrade ReinstallErase hard disk Information about the modemLanguage preferences Parental controlAppearance preferences Recording preferences Make new recordingsSaved pause recordings Repeat playingErase before record hours Type of programmeReceiver number System informationFollowing extreme example System informationConditional Access Viaccess embeddedDiagnostics Release infoTimer Smartcard settingsCommon Interface CI Important information related to the timer recording Timer setupGlossary of Terms AGCProblem Solving Problem Possible causes What to doWhat to do if you can’t solve the problem Front Panel DisplayTechnical Specifications Security information0226