MAIN MENU
Important information related to the timer recording
If you program the box to perform a timer recording e.g. in the middle of the night (or at any other unsuitable time), be sure to turn the TV set off with the mechanical switch located on the TV! If you turn the TV set off by just putting it into standby mode with the remote controll, it will be turned on at the time for the record- ing!
Timer setup
•Select Timer from the Main Menu.
•Press OK to enter the Timer Setup menu from where you make the settings.
•First, select Channel List with the 
buttons.
•Then, step to Channel to select desired TV/Radio channel.
•The present date (month/day) will automatically be preset. When you change month and day, always use two digits for each of them.
•If you enter a wrong digit you can erase it with the 
button.
The different start times may never overlap each other. If you try to enter a start or stop time within an already occupied period of time you will get a warning message about it.
•On the last line you select the Action. When you want an event to be recorded on the built in hard disk at the date and time you entered, select Record. Events that you want to be recorded this way will be marked with a red symbol in the Timer list.
Do not forget to ensure that you have enough space on the disk at the time for the recording to take place.
•If you just want to be reminded of a programme start,or when
you want to make a traditional analogue (VCR) recording, se- | Indicates a recording event |
lect View. |
|
Up to 9 different events can be predefined. The events will be sorted in start time order.
At each stop time the box will return to the state it had before it started.
You can erase a predefined event by pressing the 
button twice.
(If you regret the command after the first press, go to another line by pressing either 
or 
and the event will not be erased.)
GB 57