JA Audio 9902S manual Multisatellite/four port DiSEqC, Channel search, Automatic search

Page 18

FIRST TIME INSTALLATION

Multisatellite/four port DiSEqC

Select this alternative if your antenna system has four LNBs and when you are not using any of the alternatives on the lines 5 - 6 from the menu “Antenna/satellite selection” on page 13.

The selection of the different LNBs must be controlled by an external switch. Refer to page 15.

The procedure is the same as for mini DiSEqC and two port DiSEqC, but you have to configure four LNBs the same way as described on page 16-17.

Connection of a four port DiSEqC switch:

The following is an example of how you can connect 4 LNBs if you want to watch channels from ASTRA, HOTBIRD, SIRIUS and THOR.

Connect the LNBs to the switch the following way:

the LNB intended for ASTRA to input 1

HOTBIRD to input 2

SIRIUS to input 3

THOR to input 4

The output marked OUT on the switch shall be connected to the

ANTENNA input on the Mediamaster.

Channel search

DiSEqC switch with 4 inputs

The Channel search procedure can be performed in different ways.

If there are predefined channels, you can make an Automatic, Manual or Advanced search.

If no predefined channel is available you can make a Manual or Advanced search.

Automatic search

Start an Automatic search on a selected satellite by pressing OK.

GB 18

Image 18
Contents Mediamaster Page Contents Mediamaster 9902 SFor Your Safety Important Information in the Event of ServiceGeneral Information about the Mediamaster Remote Control Pad+ P Front and Rear Panel Front panelRear panel About the Smartcard and CA Module Viaccess smartcardOnly for services coded with the Viaccess CA system CA module with its smartcardInstallation of the Mediamaster Preparing the remote controlConnecting the Mediamaster to the dish General Connecting to the TVConnecting a TV and VCR If your TV has a Scart socket, but your VCR does notConnecting an analogue satellite receiver and a VCR Connecting a HiFi systemConnecting to the built in phone modem Switching on for the first time with Scart connections Tuning procedure when RF connections are usedTuning your TV to the Mediamaster Welcome menu First Time InstallationGeneral information LanguageRF modulator type Antenna/satellite selectionAlternatives 1-6 requires the use of a Universal LNBs Antenna adjustment and signal check Line 1 through 4 on the antenna satel- lite selection menuConnection of a two port DiSEqC switch Line 5 and 6 on the antenna satellite selection menuOne antenna/one LNB configuration Line 7 on the antenna satellite selection MenuMultisatellite/mini DiSEqC Multisatellite/two port DiSEqC Channel search Connection of a four port DiSEqC switchMultisatellite/four port DiSEqC Automatic searchMotor antenna Manual searchAdvanced search Adjust motor Type of motorPress OK First Time Installation Time adjustment Finishing the first time installationChannel search progress Viewing Mode Programme informationI information button GuideAudio language List of TV and radio channelsOptions green button Subtitle languageTV release Text button teletextRecording on an external analogue Video recorder Recording from the hard disk to a video recorderHard Disk Recording About hard disk recordingDifferent ways of making recordings Recording menuLocked functions during recording Pause Recording To watch the pause recordingTo finish this example of a pause recording Timer recording Normal recordingHandle Recording menu appears To start playback of a recordingPause function Pause during playback of a normal recordingWatch the playback at a different speed Fast Forward and Rewind of a pause recording in progressSmall steps during playback Find a specific position within a playbackSlow Motion function Edit function List of recordings Handle recordingPlay Add another recording RenameErase Recording informationSave a recording as Erasable or Permanent Edit channels Main MenuTV and radio channels Important about editing channelsRename list How to give a specific nameCreate list Rearrange listsSelect channels Lock channelsRename channels Remove channels Rearrange channelsDelete channels To remove channelsUpdate channels Update channels via a PCTo add a new satellite System configurationEdit satellites For a fixed antennaWhen your antenna is controlled by a motor Antenna/Satellite configuration TV settingsModem Setting Erase hard disk Receiver upgradeReinstall Information about the modemLanguage preferences Parental controlAppearance preferences Saved pause recordings Recording preferencesMake new recordings Repeat playingErase before record hours Type of programmeFollowing extreme example Receiver numberSystem information System informationDiagnostics Conditional AccessViaccess embedded Release infoSmartcard settings TimerCommon Interface CI Important information related to the timer recording Timer setupGlossary of Terms AGCProblem Solving Problem Possible causes What to doWhat to do if you can’t solve the problem Front Panel DisplayTechnical Specifications Security information0226