JA Audio 9902S manual Antenna/Satellite configuration, TV settings

Page 47

MAIN MENU

View attributes

Chech position and orientation for different satellites by select- ing the line “View attributes”.

Delete satellite

You can also delete an added satellite. (This is not possible for the factory preprogrammed satellites.)

If you want to delete the satellite from which you right now are watching a channel, you will get a screen message about how to proceed.

When you delete a satellite you also delete its channels from the channel lists.

Antenna/Satellite configuration

Set up and adjust motor

The procedure is the same as performed during the First Time In- stallation. Please refer to page 16.

East/West limit setup

You only have to set one or both of these limits if the antenna is prevented from reaching its East/West limit positions. This could be the case e.g. if the antenna is mounted to close to a wall or in any similar situation.

•To set these limits, select East or West limit setup and press OK.

•Adjust the antenna using the buttons.

Watch the antenna movement, and when it has reached its pos- sible limit, press OK. The other limit is set in the same way (if needed).

Remove limits

In case you need to remove limits.

When you perform this command you do not just remove the lim- its. The motor will also turn itself to the 0° (Zero) position. How- ever, next time you select a channel the motor will turn to its proper position.

TV settings

From here you can adjust settings concerning your TV.

TV screen format

Select your TV screen format.

The 4:3 format is the standard format for most TV screens. Select 16:9 for a wide screen TV.

GB 47

Image 47

Contents Mediamaster Page Mediamaster 9902 S ContentsGeneral Information about the Mediamaster For Your SafetyImportant Information in the Event of Service + P Remote ControlPad Rear panel Front and Rear PanelFront panel CA module with its smartcard Viaccess smartcardOnly for services coded with the Viaccess CA system About the Smartcard and CA ModuleConnecting the Mediamaster to the dish Installation of the MediamasterPreparing the remote control If your TV has a Scart socket, but your VCR does not Connecting to the TVConnecting a TV and VCR GeneralConnecting to the built in phone modem Connecting an analogue satellite receiver and a VCRConnecting a HiFi system Tuning your TV to the Mediamaster Switching on for the first time with Scart connectionsTuning procedure when RF connections are used Language First Time InstallationGeneral information Welcome menuAlternatives 1-6 requires the use of a Universal LNBs RF modulator typeAntenna/satellite selection Line 1 through 4 on the antenna satel- lite selection menu Antenna adjustment and signal checkLine 5 and 6 on the antenna satellite selection menu Connection of a two port DiSEqC switchMultisatellite/mini DiSEqC One antenna/one LNB configurationLine 7 on the antenna satellite selection Menu Multisatellite/two port DiSEqC Automatic search Connection of a four port DiSEqC switchMultisatellite/four port DiSEqC Channel searchAdvanced search Motor antennaManual search Press OK Adjust motorType of motor First Time Installation Channel search progress Time adjustmentFinishing the first time installation Programme information Viewing ModeGuide I information buttonSubtitle language List of TV and radio channelsOptions green button Audio languageText button teletext TV releaseRecording from the hard disk to a video recorder Recording on an external analogue Video recorderAbout hard disk recording Hard Disk RecordingLocked functions during recording Different ways of making recordingsRecording menu To watch the pause recording Pause RecordingTo finish this example of a pause recording Normal recording Timer recordingPause during playback of a normal recording To start playback of a recordingPause function Handle Recording menu appearsFast Forward and Rewind of a pause recording in progress Watch the playback at a different speedSlow Motion function Small steps during playbackFind a specific position within a playback Edit function Play List of recordingsHandle recording Recording information RenameErase Add another recordingSave a recording as Erasable or Permanent Important about editing channels Main MenuTV and radio channels Edit channelsRearrange lists How to give a specific nameCreate list Rename listRename channels Select channelsLock channels To remove channels Rearrange channelsDelete channels Remove channelsUpdate channels via a PC Update channelsFor a fixed antenna System configurationEdit satellites To add a new satelliteWhen your antenna is controlled by a motor TV settings Antenna/Satellite configurationModem Setting Information about the modem Receiver upgradeReinstall Erase hard diskParental control Language preferencesAppearance preferences Repeat playing Recording preferencesMake new recordings Saved pause recordingsType of programme Erase before record hoursSystem information Receiver numberSystem information Following extreme exampleRelease info Conditional AccessViaccess embedded DiagnosticsCommon Interface CI Smartcard settingsTimer Timer setup Important information related to the timer recordingAGC Glossary of TermsProblem Possible causes What to do Problem SolvingFront Panel Display What to do if you can’t solve the problemSecurity information Technical Specifications0226