JA Audio 9902S Channel search progress, Time adjustment, Finishing the first time installation

Page 22

FIRST TIME INSTALLATION

The position of 22 satellites are preprogrammed in the SatScan motor.

As long as you select satellite positions from the line “Automatic search” you also have access to preprogrammed TV channels that makes it easy to check the signal quality.

•From line 1 Automatic search, select the satellite from which you want to search for channels.

Then the procedure is the same as for the first satellite installa- tion.

However, you must give the antenna motor some time to turn itself to the new position!

Channel search progress

This menu will be shown as long as the Mediamaster is search- ing for channels to download

All channels found will be listed in two columns on the screen; with TV channels in one column and radio channels in the other.

Please note that the search procedure may take a few minutes.

When the search procedure has ended, a message will tell how many TV and radio channels have been found.

Press OK to continue.

Time adjustment

The time is adjusted by using the buttons, ± 1/2 an hour at a time.

You can also adjust the minutes by using the buttons. Press OK to finish the first time installation, see below.

Finishing the first time installation

The channels found at the search procedure will now be saved. A message telling that the installation procedure is completed will be shown on the screen.

Press OK in order to start watching channels from the box.

GB 22

Image 22

Contents Mediamaster Page Contents Mediamaster 9902 SImportant Information in the Event of Service For Your SafetyGeneral Information about the Mediamaster Pad Remote Control+ P Front panel Front and Rear PanelRear panel About the Smartcard and CA Module Viaccess smartcardOnly for services coded with the Viaccess CA system CA module with its smartcardPreparing the remote control Installation of the MediamasterConnecting the Mediamaster to the dish General Connecting to the TVConnecting a TV and VCR If your TV has a Scart socket, but your VCR does notConnecting a HiFi system Connecting an analogue satellite receiver and a VCRConnecting to the built in phone modem Tuning procedure when RF connections are used Switching on for the first time with Scart connectionsTuning your TV to the Mediamaster Welcome menu First Time InstallationGeneral information LanguageAntenna/satellite selection RF modulator typeAlternatives 1-6 requires the use of a Universal LNBs Antenna adjustment and signal check Line 1 through 4 on the antenna satel- lite selection menuConnection of a two port DiSEqC switch Line 5 and 6 on the antenna satellite selection menuLine 7 on the antenna satellite selection Menu One antenna/one LNB configurationMultisatellite/mini DiSEqC Multisatellite/two port DiSEqC Channel search Connection of a four port DiSEqC switchMultisatellite/four port DiSEqC Automatic searchManual search Motor antennaAdvanced search Type of motor Adjust motorPress OK First Time Installation Finishing the first time installation Time adjustmentChannel search progress Viewing Mode Programme informationI information button GuideAudio language List of TV and radio channelsOptions green button Subtitle languageTV release Text button teletextRecording on an external analogue Video recorder Recording from the hard disk to a video recorderHard Disk Recording About hard disk recordingRecording menu Different ways of making recordingsLocked functions during recording Pause Recording To watch the pause recordingTo finish this example of a pause recording Timer recording Normal recordingHandle Recording menu appears To start playback of a recordingPause function Pause during playback of a normal recordingWatch the playback at a different speed Fast Forward and Rewind of a pause recording in progressFind a specific position within a playback Small steps during playbackSlow Motion function Edit function Handle recording List of recordingsPlay Add another recording RenameErase Recording informationSave a recording as Erasable or Permanent Edit channels Main MenuTV and radio channels Important about editing channelsRename list How to give a specific nameCreate list Rearrange listsLock channels Select channelsRename channels Remove channels Rearrange channelsDelete channels To remove channelsUpdate channels Update channels via a PCTo add a new satellite System configurationEdit satellites For a fixed antennaWhen your antenna is controlled by a motor Antenna/Satellite configuration TV settingsModem Setting Erase hard disk Receiver upgradeReinstall Information about the modemLanguage preferences Parental controlAppearance preferences Saved pause recordings Recording preferencesMake new recordings Repeat playingErase before record hours Type of programmeFollowing extreme example Receiver numberSystem information System informationDiagnostics Conditional AccessViaccess embedded Release infoTimer Smartcard settingsCommon Interface CI Important information related to the timer recording Timer setupGlossary of Terms AGCProblem Solving Problem Possible causes What to doWhat to do if you can’t solve the problem Front Panel DisplayTechnical Specifications Security information0226