JA Audio 9902S System configuration, Edit satellites, To add a new satellite, For a fixed antenna

Page 45

MAIN MENU

System configuration

You will be asked to enter your access code before you can en- ter this menu. The code is preset to 1234 from the factory. (The code can be changed from the Parental control menu. Re- fer to page 50.)

If you want to customize the system to suit you better, you can specify some settings from the submenus in the “System con- figuration” menu.

Please note that many of these functions are the same as in the “First time installation.”

Channel search

The procedure is the same as performed during the First Time In- stallation. Please refer to page 18-19.

Edit satellites

When a new satellite has been sent into orbit, or if you select a not preprogrammed satellite, you can add it to the existing sat- ellite list.

To add a new satellite

•Select the line “New satellite”.

•Press OK.

•Enter the name of the new satellite. (How to enter a name is described on page 41.)

•Enter the position (in degrees) with the numeric buttons on the remote control. (Use the left arrow button to erase digits.)

•Select orientation; East or West.

•Press OK to save these settings.

Before you can watch channels from that new satellite you must also carry out the following steps:

For a fixed antenna:

•Select “Antenna/Satellite configuration” in the “System con- figuration” menu.

•Follow the instructions on page 15. From the menu “Antenna adjustment” select the new satellite name.

GB 45

Image 45

Contents Mediamaster Page Mediamaster 9902 S ContentsFor Your Safety Important Information in the Event of ServiceGeneral Information about the Mediamaster Remote Control Pad+ P Front and Rear Panel Front panelRear panel Only for services coded with the Viaccess CA system Viaccess smartcardAbout the Smartcard and CA Module CA module with its smartcardInstallation of the Mediamaster Preparing the remote controlConnecting the Mediamaster to the dish Connecting a TV and VCR Connecting to the TVGeneral If your TV has a Scart socket, but your VCR does notConnecting an analogue satellite receiver and a VCR Connecting a HiFi systemConnecting to the built in phone modem Switching on for the first time with Scart connections Tuning procedure when RF connections are usedTuning your TV to the Mediamaster General information First Time InstallationWelcome menu LanguageRF modulator type Antenna/satellite selectionAlternatives 1-6 requires the use of a Universal LNBs Line 1 through 4 on the antenna satel- lite selection menu Antenna adjustment and signal checkLine 5 and 6 on the antenna satellite selection menu Connection of a two port DiSEqC switchOne antenna/one LNB configuration Line 7 on the antenna satellite selection MenuMultisatellite/mini DiSEqC Multisatellite/two port DiSEqC Multisatellite/four port DiSEqC Connection of a four port DiSEqC switchChannel search Automatic searchMotor antenna Manual searchAdvanced search Adjust motor Type of motorPress OK First Time Installation Time adjustment Finishing the first time installationChannel search progress Programme information Viewing ModeGuide I information buttonOptions green button List of TV and radio channelsAudio language Subtitle languageText button teletext TV releaseRecording from the hard disk to a video recorder Recording on an external analogue Video recorderAbout hard disk recording Hard Disk RecordingDifferent ways of making recordings Recording menuLocked functions during recording To watch the pause recording Pause RecordingTo finish this example of a pause recording Normal recording Timer recordingPause function To start playback of a recordingHandle Recording menu appears Pause during playback of a normal recordingFast Forward and Rewind of a pause recording in progress Watch the playback at a different speedSmall steps during playback Find a specific position within a playbackSlow Motion function Edit function List of recordings Handle recordingPlay Erase RenameAdd another recording Recording informationSave a recording as Erasable or Permanent TV and radio channels Main MenuEdit channels Important about editing channelsCreate list How to give a specific nameRename list Rearrange listsSelect channels Lock channelsRename channels Delete channels Rearrange channelsRemove channels To remove channelsUpdate channels via a PC Update channelsEdit satellites System configurationTo add a new satellite For a fixed antennaWhen your antenna is controlled by a motor TV settings Antenna/Satellite configurationModem Setting Reinstall Receiver upgradeErase hard disk Information about the modemParental control Language preferencesAppearance preferences Make new recordings Recording preferencesSaved pause recordings Repeat playingType of programme Erase before record hoursSystem information Receiver numberFollowing extreme example System informationViaccess embedded Conditional AccessDiagnostics Release infoSmartcard settings TimerCommon Interface CI Timer setup Important information related to the timer recordingAGC Glossary of TermsProblem Possible causes What to do Problem SolvingFront Panel Display What to do if you can’t solve the problemSecurity information Technical Specifications0226