Control Other Devices with the Remote
Set Up the Remote Control
You can set up the remote to control other devices using the device codes listed on page 86. In the following instructions, the column on the left contains the instructions and the column on the right provides additional information.
Instructions | Additional Information |
1. Turn the device on.
Use the device’s front panel buttons or its remote control.
2.Find the brand name of the device in the tables starting on page 86.
3.Press and hold the mode button until all the other mode buttons light up, and then let go of the button. The mode button flashes.
If the brand isn’t listed, see Setting Up Using Device Codes Scan on page 86.
For example, hold TV for a TV until all of the other mode buttons light. When you let go, TV will flash.
4.For AUX mode only. Press 0 for a second TV, or 1 for a second VCR, or 2 for a tuner, or amplifier.
This step is for programming which kind of device that should be programmed in AUX mode. If you’re not programming in AUX mode, continue to step 5.
5.Enter one of the
The
6.If you want to program Limited Mode, press 1. If not, skip to step 7.
7.Press POUND (#).
8.Press POWER to turn off the device. If the device does not turn off, go to step 10.
9.Turn the device back on and try some other buttons to make sure they work. If the code works for other buttons, stop here.
10If the code doesn’t work, redo steps 3 through 9 with another device code from the tables.
See Limited Mode for more information.
If you entered the code correctly, the mode button flashes three times.
If the code works, the device should turn off.
Sometimes POWER works when other buttons don’t.
Try every code listed for your brand until one works for your device.
Page 65
Page 65