Starting up
Setup menu
The default setting (status of the MSK 24 when it is switched on) can be set in the setup menu.
Factory settings
Parameter | Setting |
POWER ON | TV |
LNB DC | OFF |
LEVEL | dBìV |
Low Level Mute | ON |
Settings in the setup menu
Calling up the setup menu
POWER ON
TV=1 SAT=2 FM=3
1. Setup menu
|
|
LNB DC |
|
OFF=1 | ON=2 |
|
|
|
|
2. Setup menu |
|
|
|
Level |
|
dBµV=1 | dBmV=2 |
|
|
|
|
3. Setup menu |
|
|
|
CH: .07. | TV |
LEV:____.__dBµV | |
|
|
|
|
4. Setup menu |
|
| |
LOW LEVEL MUTE | |
OFF=1 | ON=2 |
|
|
|
|
Default setting
Press the [2ndF] and [SETUP] buttons.
Press button [1], [2] or [3] to select the appropriate TV, SAT or FM mode. Press [ENTER] to retain the current setting.
The following request appears:
Press button [1] or [2] to switch the LNB voltage supply on or off. Press [ENTER] to retain the current setting.
In the next menu press button [1] or [2] to set the measuring unit in which the level should be displayed. Press [ENTER] to retain the current setting.
In the next menu you are requested to set the mute function by pressing button [1] or [2]. Select "ON" to mute the MSK 24 as long as the input signal on the RF input is below 30 dBìV.
Press [ENTER] to retain the current setting.
If you have not altered the factory default setting, the information shown on the left is displayed.
As soon as you have set the low level mute, setup menu 4 is exited automatically and the default setting displayed.
16