Sat measurement
Tracking for Single Frequencies
In the "LEVEL " function you can align an antenna by tracking to receive the maximum signal. The level tendency can be indicated in the bar display. The measuring range can be set to three different sensitivity levels.
The level can be monitored with an audio tracking signal, the volume being proportional to the level of the signal received. The volume of the audio tracking signal can be set with the volume control.
Overview of commands in Tracking
[2ndF] [LEVEL ] Switch over to the tracking mode
ë | Change the measuring range of the bar display. | |
|
The measuring range is preselected automatically.
Level range 1: high input level
Level range 2: medium input level
Level range 3: low input level
Exit the LEVEL mode by pressing [2ndF] twice.
LC display:
>
Example
0
∙Level range 2: medium input level
∙SAT mode
∙Bar display
Call up the "LEVEL " function.
Press the [2ndF] and [LEVEL ] buttons.
Rotate the antenna until the maximum bar display is reached.
If necessary, decrease or increase the sensitivity with the
Repeat this procedure until you have reached the maximum level.
Exit the LEVEL menu by pressing [2ndF] twice.
22