Kathrein MSK 24 manual Sat measurement

Sat measurement

		B inactive)
2A	Set S3A	Call up matrix S3 input A (input			-
		B inactive)
2B	Set S4A	Call up matrix S4 input A (input			-
		B inactive)
2C	Set S1B	Call up matrix S1 input B (input			-
		A inactive)
2D	Set S2B	Call up matrix S2 input B (input			-
		A inactive)
2E	Set S3B	Call up matrix S3 input B (input			-
		A inactive)
2F	Set S4B	Call up matrix S4 input B (input			-
		A inactive)
30	Sleep	All bus commands are ignored			-
		except for "Awake".
31	Awake	Bus	commands are	accepted	-
		again.
38	Write N0	Set port group 0			1
39	Write N1	Set port group 1			1
3A	Write N2	Expansion option			1
3B	Write N3	Expansion option			1
40	Read A0	Read analogue value A0			-
41	Read A1	Read analogue value A1			-
48	Write A0	Set analogue value A0			1
49	Write A1	Set analogue value A1			1
4F	Write A7	Set analogue value A7			1
50	LO string	Read current frequency			-
51	LO now	Read	current frequency (table		-
		entry number)
52	LO Lo	Read Lo frequency table entry			-
		number
53	LO Hi	Read Hi frequency table entry			-
		number
58	Write Freq	Write channel frequency			2 or 3
59	Ch.No.	Set	the selected	channel	2
		number (receiver)
60	Halt	Stop positioner			-
61	Go E	Move positioner towards east			-
62	Go W	Move positioner towards west			-
64	P Status	Read positioner status register			-
65	Read Pos	Read positioner counter			-
6C	Goto	Move	positioner	motor to	2
		counter value, Hi, Lo
6D	Write Pos	Set positioner counter, Hi, Lo			2

30