Kathrein cap910 manual Hdmi Video

FIRST INSTALLATION

The following display appears:

Use the buttons to select whether to replace the factory pre-programmed channel list by a pre-sorted channel list for a specific country (at present only a limited number of pre-sorted channel lists are available). If you prefer to use the factory pre-programmed channel list, choose “No” under “Restore Channellist”.

Press the (green) button to move to the next menu.

The following display appears:

Use the  buttons here to select the basic settings for the video and audio output from the receiver to the TV set.

For this, refer to the operating manual for your TV set and take care to select only those settings that your TV set can process.

Video Output via

Select the connection on the receiver to which you have connected your television. Either

HDMI or VIDEO

Note: The better picture quality, in particular for HDTV signal is obtained via the HDMI port. The precondition for this however is that your TV set has a HDMI port.

HDMI Format

Here you can select the picture resolution that will be sent to your TV set. Either

-1080i (resolution 1920 x 1080, half-screen images)

-576p (resolution 720 x 576, full-screen images) or

-720p (resolution 1280 x 720, full-screen images)

-automatically

TV Format

Here you can select the TV picture format. Either

-4:3 or

-16:9

41