CHANNEL (SATELLITE) SELECTION/PROGRAMMING THE TIMER
view the currently selected channel in the small window at the top right. To exit the channel list and return to the TV picture, press the button again, or press the button.
Note: A comprehensive explanation of the channel list with its detailed functions (e.g. the scan and sort function) can be found in the UFS 940sw operating manual.
CHANNEL SELECTION FROM THE CHANNEL LIST (SORTED BY SATELLITE)
To view the channel list sorted by the saved satellites, proceed as follows. Press the button (starting from the TV picture). If the “green view” does not appear in the complete list, press the (green) button.
Now use the buttons to select the desired satellite. You will automatically see the channel list stored for the satellite (see example):
The channel selection functions as previously described “Channel selection from a channel list”.
TIMER PROGRAMMING
The timer function is currently not yet available in CAP mode!
See the UFS 940sw operating manual for details of how to program the timer. When using the UFS 940sw on a CAP 910 please note the following additional instruction:
To prevent the turntable rotating at a time when it is unsupervised or when rotation might be irritating (e.g. in the middle of the night), a timer can be set. During the timer period the turntable is active only if the UFS 940sw is in operation or is in standby mode.
If the receiver is completely switched off (switched off at the power socket) and/or the turntable is in park position, the turntable will be inactive during the timer period! The same applies if during the first movement the satellite position is not found.
51