Kathrein cap910 manual System

FIRST INSTALLATION

Show 4:3 event

Here you can select the type of screen display mode for 4:3 broadcasts on a 16:9 TV set:

-normal (pillarbox)

-Stretched (Full Screen) or

-zoom in (Pan & Scan)

Audio format via HDMI

Here you can select the type of audio signal that is transmitted by the HDMI interface. Select the signal that your TV set can process:

-Decoded PCM or

-S/PDIF format

TV standby via HDMI

If you select “Off”, the TV set must be switched on or off separately. If you select “On”, the TV set will be switched on automatically as the receiver starts up (but only if the TV set was in stand-by mode). If the receiver is switched off into stand- by mode, the TV set will also be switched to stand-by mode.

Automatically switching the TV set on/off by the receiver is available only if the TV set supports this function!

Press the (green) button to move to the next menu.

The following display appears:

Picture format

Select the type of screen display, depending on your setting for the TV format:

-TV aspect ratio “4:3”: Pan & Scan or Letterbox

-TV aspect ratio “16:9”: Always 16:9 or automatic

Television System

Here you can select the TV standard you wish to use.

-PAL or

-NTSC or

-MULTI

System

Use the  buttons here at “System” to select “CAP”. Then use the  buttons to select the “Initialize CAP” line and press the button to confirm.

42