Kathrein UFD 170 manual TV / Radio Channel Message, Error Message, Channel Message Radio

On Screen Display (OSD)

TV / Radio Channel Message

The channel message is displayed for a few seconds each time you

change the programme, or constantly if you press . The “ i” indicates that a channel is being received even if no picture can be seen (e.g. in radio mode).

Channel

message

TV

Channel

message

Radio

The TV symbol indicates a TV channel - adjacent to it is the selected programme, whether video text can be received and the current time. The “+” in the third line stands for the programme selection from the overall list (when selecting from favourites list, an apple symbol appears instead of the “+”). This is followed by the programme title and the start and end times of the current programme, if this data is broadcast by the programme provider.

The message for the set radio channel has the same layout. A radio unit symbol in the top left-hand corner indicates that it is a radio channel. Broadcast times and text are only shown if these are transmitted by the radio broadcaster.

Error Message

“Weak or no signal” indicates that an error has occurred in the receiving system or in the receiver settings, or that the transponder is not sending. The channel message then shows a satellite antenna instead

of the “ i”. Check the SAT-IF connection and the LNB confi guration. The list of service settings at the end of this manual can be used to help you do this.

20