Kathrein UFD 170 manual Special Messages for Turntable, System Protection Messages

Page 70

Special Messages for Turntable

System Protection Messages

The following messages are shown on the screen to protect your receiving system and the on-board network:

If this message appears, check the turntable and antenna to ascertain whether the system is blocked by an object (e.g. a branch) or whether the on-board voltage is too low. Proceed in the sequence shown above (screen).

The following message indicates that the battery voltage has fallen below a minimum value and the battery needs to be recharged:

You can continue to operate the sytem, but there may be communication errors between the UFD 170 and the turntable (e.g. for satellite search).

The antenna should not be moved during recharging, to prevent peak loads when turning on.

Satellite Lost / Limit Reached

In rare cases, the satellite can be lost when searching, or it may not be found after the complete search time (e.g. if the signal is weak at the edges of the footprint, if there is movement in the vehicle or unfavourable reception conditions such as heavy rain and snow). The following messages then appear:

Use the key to hide a message. Choose a different channel for the same satellite. The following screen appears:

70

Image 70
Contents UFD Page Foreword Contents Installation Menu Password and Child ProtectionSetting System Parameters Connection DiagramContents Safety Instructions and Important Information Power supply cableReceiving System Presets Connection and SetupConnecting the Unit SAT-IF ConnectionAudio Connection Inserting Batteries in the Remote ControlTV Connection Dolby ConnectionFront View Controls, Displays and ConnectionsFront View Rear View Remote Control Function Keys ExitImportant information on the remote control Remote control instruction setsMenu Concept Operating InstructionsLanguage Selection Alphanumeric Assignment of Remote Control Number Keys KeyMenu Structure Important Information Initial SetupGetting Started Initial Setup Receiver Factory Satellite Setting Time/Timer sectionGeneral On Screen Display OSDHelp Function TV / Radio Channel Message Error MessageChannel Message Radio Video Text Selecting a TV or Radio Programme Programme SelectionReception Status TV / Radio Channel List Switching from a TV Programme to a Radio Programme Selecting TV/Radio Programmes by NumberCommon Interface Inserting the Smartcard and the CA ModuleMenu language Information for Conax, SECA, Viaccess and CryptoWorks Users Timer Settings VPS Signal Setting the Volume Audio SettingsStereo and Two-Channel Sound Playback Turning Off the Sound Mute Your Dolby Digital systemProgramme Overview EPG EPG Electronic Programme GuideEPG Timer Programming Managing Channel List/Channels Selecting the Last Programmes ReceivedSetting Up a Favourite Channel Favourite ChannelRenaming the Favourite Lists Selecting a Favourite Channel from a Favourite List Undoing Favourite SelectionChannel List Mode Favourite, Satellite, Alphabetical Complete Channel List Sorting Channels Deleting Channels Adding Channels Manually Setting Up Satellites Adding/Deleting SatellitesDeleting Satellites Password Factory Setting Password and Child ProtectionSetting the Password and Child Protection Child Protection Locking a Channel Password and Child Protection Child Protection Setting System ParametersSystem Information TV Type Local Time/TimerPicture Format Screen ModeLNB Configuration Installation MenuOpening the Installation Menu Oscillator FrequencyOperation StandbyDiSEqC1 Setting DiSEqC2 SettingAntenna Setup Satellite Search Changing/Searching for/Deleting Transponders DiSEqCTM UFO Setup DiSEqCTM KHz SignalTone Burst and DiSEqCTM Signal DiSEqCTM RepeatAfter resetting, you may need to make all settings again Factory SettingsReset does not delete the pre-programming Remote FrequencySoftware and Programme List Update During the download, Please wait fl ashes on the screen Connection Diagram Connection between Type of connectionOn-Board Network Connection SAT-ZF ConnectionControl Cable Important Information on the Turntable before Setup Initial Setup InformationAlignment Satellite Search Manual Correction Alignment Satellite Search Change of Location Reset/Park ResetPark System Protection Messages Special Messages for TurntableSatellite Lost / Limit Reached Using the  key Turntable Unit Software Download Turntable Unit Software Download Safety Instructions Manual Lowering to Park PositionManual Retraction Service Glossary DVBDolby Digital Brief Technical GlossaryDiSEqC components Eb/No ratioTransponder Symbol rateProgramme package Video bit rate936.2705/B/0505/ZWT Subject to technical changes