Installation Menu
Changing/Searching for/Deleting Transponders
If you want to change your system over to a new satellite, you must manually enter at least one recognised transponder.
The transponder number specified in brackets is an internal reference number for the receiver and has nothing to do with the transponder number of the satellite.
In this menu, the transponders can scan selectively for channels, for example if new channels are offered in a particular broadcaster‘s range. This information is available on the Internet or in specialist magazines.
You reach this menu from the installation menu using the keys and confi rm your selection with the key.
You can now access the individual items using the keys. The following settings are possible:
-Preferred satellite using or
-Transponder frequency using or (or number keys)
-Polarisation using or
-Symbol rate with the number keys
-Search mode for exclusively freely receivable or for free and
encrypted channels with or
The bar chart shows the relative signal strength, but is not an indicator of the quality of the reception system.
The search is started using under the “Search” option. You will see the message “Search active”. After completion of the search, you will see the following message (example):
55