Audio Settings
Setting the Volume
Use the keys on the UFD 170 remote control to set the desired volume on the receiver. A bar is shown, which indicates the set volume:
Stereo and Two-Channel Sound Playback
The set sound playback method can be seen from the channel
message, which you can view using the key (depending on the alignment of the sound wave symbols).
The alignment of the sound wave symbols shows the setting - mono left (sound waves point to the left), mono right (sound waves point to the right) or stereo (sound waves point in both directions). The fi rst of the two fi gures indicates how many sound channels are being transmitted and the second fi gure indicates which channel is currently selected.
Use the key to open the Audio menu for sound and language se- lection, where you can make the desired settings as long as they are included in the received signal, e.g. language selection (soundtrack), Dolby Digital.
Select the menu options using the keys and make the desi- red settings with the keys. Press again to exit the menu. If subtitles are broadcast, you can select their language using the
keys in the “Subtitle track” bar. Confi rm your entry with
30