Special Messages for Turntable
Note: | If this screen does not appear automatically, you can call it up manually |
| using the key |
Press to restart the search.
If the search is unsuccessful again, e.g. due to very poor weather or because you are in a marginal area, reset the search mode from “Standard” to “Fine” as described below.
Press to hide the current screen display. Press in the main
menu and then use the keys to switch to the “HDP antenna setup” option. Then press to go to the HDP menu.
The keys take you to the “Search Mode” option.
Change the selection from “Standard” to “Fine” using the keys.
Pressing twice takes you back to the normal screen. Now press
again, followed by the key.
In “Fine mode”, the search takes slightly longer as searching is now done at a lower speed and with a smaller search grid.
71