Sylvania 3819LC owner manual Channel SET UP Again, DAYLIGHT-SAVING Time, Selecting the Language

CHANNEL SET UP AGAIN

Make sure ...

●Press the POWER button to turn on the TV/VCR.

●You must use the remote control for the following steps.

1Select "CHANNEL SET UP"

Press the MENU button.
Press the PLAY/▲ or STOP/▼	– M E N U –
	PICTURE CONTROL
	TIMER PROGRAMMING
button to point to "CHANNEL	SETTING CLOCK
	B CHANNEL SET UP
SET UP".	USER’S SET UP
	LANGUAGE [ENGLISH]
	CAPTION [OFF]
	ZERO RETURN
Then, press the F.FWD/B button.	TIME SEARCH

If at this moment the unit does not enter the CHANNEL SET UP menu, the unit may be in the "AUX" mode. Press the MENU button, select any channel (ex. 02), then try again from step [1].

2 Begin auto preset		– CHANNEL SET UP –
Press the PLAY/▲ or STOP/▼		ADD / DELETE CH (TV)
button to point to "AUTO	B	AUTO PRESET
PRESET".

Then, press the F.FWD/B button.

The tuner scans and memorizes all the active channels in your area.

NOTE: If for some reason the menu is in Spanish, press the MENU button, press the PLAY/▲ button to point to "IDIOMA [ESPAÑOL]", then press the F.FWD/ B button, then press the MENU button.

DAYLIGHT-SAVING TIME

Select this feature and the TV/VCR’s clock automat- ically will advance one hour in April, then reverse one hour in October.

When Daylight-Saving Time is ON, the clock will change automatically as follows:

●First Sunday of April : from 2:00AM to 3:00AM

(summer time): When programmed recording starts between 2:00AM - 2:59AM on this day, the TV/VCR will start recording at 3:00AM.

●Last Sunday of October : From 2:00AM to 1:00AM

When programmed recording ends between 1:00AM - 1:59AM on this day, the TV/VCR will stop at 2:00AM.

Make sure ...

●Press the POWER button to turn on the TV/VCR.

●You must use the remote control for the following steps.

3After scanning

The tuner stops on the lowest memorized channel.

SELECTING THE LANGUAGE

Make sure ...

1Select "SETTING CLOCK"

Press the MENU button.

Press the PLAY/▲ or STOP/▼ button to point to "SETTING CLOCK".

Then, press the F.FWD/Bbutton.

– M E N U –

TIMER PROGRAMMING PICTURE CONTROL

BSETTING CLOCK CHANNEL SET UP USER’S SET UP LANGUAGE [ENGLISH] CAPTION [OFF]]

ZERO RETURN TIME SEARCH

●Press the POWER button to turn on the TV/VCR.

●You must use the remote control for the following steps.

2Select "D.S.T." (Daylight-Saving Time)

NOTE: This feature WILL NOT change the audio (sound) coming out of the TV/VCR, it will only change the screen menu.

1 Select "LANGUAGE"	– M E N U –
Press the MENU button.	PICTURE CONTROL
	TIMER PROGRAMMING
	SETTING CLOCK
Press the PLAY/▲ or STOP/▼	CHANNEL SET UP
	B LANGUAGE [ENGLISH]
	USER’S SET UP
button to point to
	CAPTION [OFF]
	ZERO RETURN
"LANGUAGE".	TIME SEARCH

Press the PLAY/▲ or STOP/▼ "D.S.T".

3Set "D.S.T." (Daylight- Saving Time) to [ON]

Press the F.FWD/B or REW/s button until [ON] appears.

button to point to

– SETTING CLOCK –

AUTO CLOCK	[ON]
AUTO CLOCK CH	[AUTO]
MANUAL CLOCK SET
B D.S.T.	[ON]

2Select "ENGLISH" or "ESPAÑOL"

Select "ENGLISH" or "ESPAÑOL"= Spanish using the F.FWD/B or REW/s button.

3Exit the Language mode

Press the MENU button to return to TV mode.

4Exit the Daylight-Saving Time mode

Press the MENU button to return to TV mode.

TO CANCEL THE DAYLIGHT-SAVING TIME

Repeat steps [1] to [3], select [OFF] using the F.FWD/B or REW/s button.

- 13 - EN

7L01