CLOCK SET UP
(AUTO / MANUAL)
Set the clock accurately for proper automatic timer recording. If the Public Broadcasting Station (PBS) is available in your area, follow "AUTO CLOCK SETTING". If it is not, follow "MANUAL CLOCK SETTING".
2 Set "AUTO CLOCK" to | – SETTING CLOCK – | ||||
|
|
|
|
| |
|
|
|
|
| |
[ON] | B AUTO CLOCK |
| [ON] |
| |
AUTO CLOCK CH |
| [AUTO] | |||
Press the F.FWD/B or REW/s |
| ||||
MANUAL CLOCK SET | |||||
button repeatedly until [ON] | D.S.T. |
| [OFF] | ||
appears. |
|
|
|
|
|
3Enter the channel number for the PBS station
AUTO CLOCK SETTING
You can have the TV/VCR set the clock automatically by using the Public Broadcasting Station (PBS) channel in your area. Once you have set the clock by using the following procedure, the TV/VCR will automatically monitor the correct time and date being broadcast by the PBS station in your area, using a new service called
Press the PLAY/▲ or STOP/▼ button to point to "AUTO CLOCK CH".
Then press the F.FWD/B or REW/s button until the channel number for your local PBS station appears.
– SETTING CLOCK –
AUTO CLOCK | [ON] | |
|
|
|
BAUTO CLOCK CH 
[AUTO]
MANUAL CLOCK SET
D.S.T.[OFF]
Extended Data Service (XDS).
Make sure ...
●Use the remote control for this procedure.
●TV/VCR power must be turned on.
●Confirm that the antenna connections are correct.
●The cable converter box must be turned on if your TV/VCR is connected directly to it. (See NOTES:)
NOTES:
●Auto clock setting only needs to be set once. But it can be done again if the clock’s time has become incorrect for some reason.
●If the TV/VCR is connected directly to a cable converter box or satellite box, the local PBS station must be selected on the cable box itself, and the TV/VCR must be set to the output channel of the cable converter box or satellite box
(usually channel 3 or 4), to be able to set up or correct the clock automatically.
If you do not know what your local PBS station is, then follow "Manual Clock Settings" on page 15.
The TV/VCR cannot control the channels of the cable converter box or satellite box.
If you do not know the PBS channel number, leave it set to [AUTO] which is located before [2]. The TV/VCR will search automatically all available channels for the local PBS station, and will select that channel.
4Exit the Auto Clock Setting
Press the MENU button to return to TV mode.
5Turn off the TV/VCR
Press the POWER button to turn off the TV/VCR for searching the local PBS station. The power must remain off during this search.
If you enter the channel number manually,
●it may take a few minutes for this search to be com- pleted.
If you choose [AUTO],
● the TV/VCR must search until the PBS channel is |
found. It must scan each channel for a couple of sec- |
onds to determine if that channel is transmitting the |
XDS signal. This search could take up to 10 |
minutes if the local PBS station is on a high numbered |
channel in your area or on your cable system. |
● if the time, that is automatically set by this selected |
PBS station is incorrect, it may not be your local PBS |
station, but one from a different time zone. Or there |
is a case that no channel is broadcasting the XDS |
1Select "SETTING CLOCK"
Press the MENU button.
Press the PLAY/▲ or STOP/▼ button to point to "SETTING CLOCK".
Then, press the F.FWD/B button.
– M E N U –
TIMER PROGRAMMING PICTURE CONTROL
BSETTING CLOCK CHANNEL SET UP USER’S SET UP LANGUAGE [ENGLISH] CAPTION [OFF] ZERO RETURN
TIME SEARCH
signal in your area, as shown by no time being set |
even after a 10 minutes search. In these cases, you |
must manually enter the correct local PBS station, or |
set the clock manually and turn off the Auto Clock |
Setting feature. |
- 14 - | EN |