MANUAL CLOCK SETTING
Make sure ...
•TV/VCR power must be turned on.
In the example below, the clock is to be set to:
DATE | May 1st, 2001 |
SETTING TIME | 5:40PM |
1Select “SETTING CLOCK”
Press the MENU button on the remote control.
Press the PLAY/K or STOP/L but- ton to point to “SETTING CLOCK”.
Then, press the F.FWD/B button.
– M E N U –
TIMER PROGRAMMING PICTURE CONTROL
BSETTING CLOCK CHANNEL SET UP USER’S SET UP
TIME SEARCH
6 Select the hour | – MANUAL CLOCK SET – | ||
Press the PLAY/K or STOP/L but- | MONTH DAY | YEAR | |
ton until your desired hour appears. | 0 5 | / 0 1 | TUE 2 0 0 1 |
|
|
| |
(Example: 5, PM) | HOUR | MINUTE | |
|
|
| |
Then, press the F.FWD/B button. | 0 5 | : – – | PM |
|
|
| |
|
| ||
7 Select the minute | – MANUAL CLOCK SET – | ||
|
|
| |
Press the PLAY/K or STOP/L but- | MONTH DAY | YEAR | |
|
|
| |
2 Select “MANUAL CLOCK | – SETTING CLOCK – | ||
SET” | AUTO CLOCK | [ON] | |
AUTO CLOCK CH | [AUTO] | ||
| |||
Press the PLAY/K or STOP/L but-
B MANUAL CLOCK SET
ton to point to “MANUAL CLOCK D.S.T.[OFF] SET”.
Then, press the F.FWD/B button.
– MANUAL CLOCK SET –
ton until the desired minute | 0 5 | / 0 1 | TUE 2 0 0 1 | |
|
|
| ||
appears. (Example: 40) | HOUR | MINUTE | ||
0 5 | : 4 0 | PM | ||
| ||||
8 Start the clock
5:40 PM
Press the MENU button on the remote control.
3Select the month
Press the PLAY/K or STOP/L but- ton until your desired month appears. (Example: May → 05) Then, press the F.FWD/B button.
4Select the day
Press the PLAY/K or STOP/L but- ton until your desired day appears. (Example: 1st → 01)
Then, press the F.FWD/B button.
5Select the year
Press the PLAY/K or STOP/L but- ton until your desired year appears. (Example: 2001)
Then, press the F.FWD/B button.
MONTH | DAY | YEAR | |
0 5 | / | – – – – – – – – – | |
HOUR |
| MINUTE | |
– – | : | – – | – – |
– MANUAL CLOCK SET – | |||
MONTH | DAY | YEAR | |
0 5 | / | 0 1 | – – – – – – – |
HOUR |
| MINUTE | |
– – | : | – – | – – |
– MANUAL CLOCK SET – | |||
MONTH | DAY | YEAR | |
0 5 | / | 0 1 | TUE 2 0 0 1 |
HOUR |
| MINUTE | |
– – | : | – – | – – |
Although seconds are not displayed, they begin counting from 00 when you press the MENU button on the
remote control. Use this feature to synchronize the clock with the correct time.
NOTE:
When unplugging the AC cord or if there is a power failure for more than 30 seconds, you may have to reset the clock.
TO CHANGE CLOCK SETTING
If you want to change the clock, 1)Follow steps [1] and [2].
2)Select where you want to change using the F.FWD/B or REW/s button.
3)Enter correct numbers using the PLAY/K or STOP/L button.
4)Press the MENU button on the remote control to start the clock.
PLEASE NOTE:
If there is no local PBS station in your area or on your cable system, select “AUTO CLOCK” and press the F.FWD/B or REW/s button to turn [OFF] this function. Then you can manually adjust the clock.
- 15 - | EN |
0B19