Sony CDP-CE505, CDP-CE305, CDP-CE405 manual 12EN, Checking the track order, Changing the track order

Playing CDs

4To programme other discs or tracks, do the following:

To programme	Repeat Step(s)
Other discs	2
Other tracks on the same disc	3
Other tracks on other discs	2 and 3

5Press áto start Programme Play.

To cancel Programme Play

Press CONTINUE.

You can create your programme while checking the disc labels

While the disc tray is open, follow Steps 1 to 5 with pressing DISC SKIP to check the disc labels. If you close the disc tray before Step 5, the total playing time appears in the display after a while.

Note that, if the programmed track number isn’t found on the disc, that step is automatically erased.

The programme remains even after the Programme Play ends

When you press á, you can play the same programme again.

The programme remains until you erase it or turn off the player

If you replace discs, the programmed disc and track numbers remain. So, the player plays only the existing disc and track numbers. However, the disc and track numbers that aren’t found in the player or on the disc are deleted from the programme, and the rest of the programme is played in the programmed order.

Note

The total playing time doesn’t appear when:

—You have programmed a track whose number exceeds 20. —The total playing time of the programme exceeds 200

minutes.

Checking the track order

You can check your programme before or after you start playing.

Press CHECK.

Each time you press this button, the display shows the track (the disc and track numbers) or the disc (the disc number and “AL” indication) of each step in the programmed order. After the last step in the programme, the display shows “End” and returns to the original display. If you check the order after you start playing, the display shows only the remaining steps.

Changing the track order

You can change your programme before you start playing.

To	Press
Erase a track	CHECK until the track you
	don’t want appears in the
	display, then press CLEAR
Erase the last track in the	CLEAR. Each time you press
programme	the button, the last track will
	be cleared.
Add tracks to the end of the	DISC 1 – 5 to select the disc,
programme	then number buttons of the
	tracks to be added
Change the whole	CLEAR until “ALL CLr”
programme completely	appears in the display.
	Create a new programme
	following the programming
	procedure.

12EN