Plasmon D875, D2175 user manual Appendix D

Error	Sub-	Error	Subcode	Compo-	Corrective Action
Code	code	Description	Description	nent
(hex)
6A	1	Pivot Fail	Pivot is loosing posi-	Offsets	Run offsets
			tion accuracy, not on
			alignment flag verifying
			pivot position
	2		Outside allowed pivot
			soft deviation steps, but
			position will succeed
	3		Outside allowed pivot
			soft deviation steps, but
			position will succeed
	4		Outside allowed pivot
			hard deviation steps,
			position will fail
	5		Destination pivot value
			out of range
	6		Pivot position failed to
			be reached (time out)
70	1	Mag door open	Time out waiting for	Mag inter-	Replace Mag circuit board or
		fail	mag door status	face circuit	solenoid, check mechanical
				board, mag	obstruction
				solenoid
71	1	Mag access	Mag door open during		Close door
		door is open	initialization
	2		Mag door opened in
			online mode (not by
			solenoid)
72	1	Door open pre-	SCSI prevent com-		Issue SCSI allow from host
		vented	mand was issued by
			host, mag door opening
			is not allowed
74	1	Rear door is	Background check of		Close Rear door
		open	rear door open during
			initialization
	2		Background check of
			rear door open during
			online operation
	3		Rear door open during
			online test ready check

Plasmon D875 - D2175 User Manual	Appendix D
Document Revision E	Page 77