Power Cable Specification
The voltage rating and the current rating of the power cord set shall be higher than the rated voltage and current of this unit. The voltage rating of the power cord set shall be higher than the power source.
For the U.S. and Canada:
Power cord must be UL listed and CSA labeled. Type SJT, SVT, ST, SJO or SO,
For Germany and continental Europe:
STROMANFNAHME:
Für eine
If there are any questions in regards to the proper cord sets, consult the distributor.
SCSI Cable Specification
SCSI Cables and Connectors
Plasmon recommends using Wide LVD SCSI cables and connectors that conform to
NOTE
To comply with the regulations and standards in this manual, all SCSI cables and connectors used with the library must be properly shielded.
SCSI Cable Length
Plasmon recommends using SCSI cables that conform to
Table 12. Maximum Allowable SCSI Cable Length (LVD)
| Library Internal Cable Length | Allowable External Cable |
|
| Length |
Bus 1 | 10 ft (3 M) | 29 ft (9 M) |
|
|
|
Bus 2 | 3 ft (1 M) | 36 ft (12 M) |
|
|
|
Bus 3 | 3 ft (1 M) | 36 ft (12 M) |
|
|
|
SCSI Termination
The Plasmon D875 - D2175 libraries are terminated internally. No external termination is required.
Plasmon D875 - D2175 User Manual | Appendix A |
Document Revision E | Page 53 |