Integra DPS-10.5 Connecting, Before Making Any Connections, AV Cables & Connectors

Page 23

Connecting

This chapter explains how to connect the DPS-10.5 to your other AV components.

Before Making Any Connections

Read the manuals supplied with your AV components.

Don’t connect the power cord until you’ve completed all audio and video connections.

Optical Digital Outputs

The DPS-10.5’s optical digital out- put sockets have dust caps for keep- ing out dust and dirt when they’re not in use. Remove the cap before insert- ing an optical plug, and push the plug in all the way to make a good connec- tion. Keep the dust cap in a safe place for future use.

RCA AV Connection Color Coding

RCA-type AV connections are usually color coded: red, white, and yellow. Use red plugs to connect right-chan- nel audio inputs and outputs (typically labeled “R”). Use white plugs to connect left-channel audio inputs and out- puts (typically labeled “L”). And use yellow plugs to connect composite video inputs and outputs.

Analog audio

 

Right (red)

Right (red)

Left (white)

Left (white)

Composite video

(Yellow)

(Yellow)

• Push each plug in all the way to

Right!

make a good connection (loose

 

connections can cause noise or

 

malfunctions).

 

• To prevent interference, keep

Wrong!

audio and video cables away

 

from power cords and speaker cables.

 

AV Cables & Connectors

Video

 

 

 

 

HDMI connections can carry uncompressed,

HDMI

 

 

HDMI

standard or high definition digital video and up

 

 

 

 

 

 

to eight channels of digital audio, for the best

 

 

 

 

 

 

 

 

picture and sound quality.

 

Y

Y

Y

Component video connections separate the

 

 

 

luminance (Y) and color difference signals (PR,

 

PB /CB

PB / CB

 

 

PB

PB) and provide picture quality better than

 

 

 

 

PR /CR

PR /CR

 

 

PR

S-Video and composite video. (Some manufac-

Component

 

 

 

 

 

turers label their component video sockets

video

 

 

 

PR /CR

PR /CR

 

slightly differently.)

 

 

 

PB /CB

PB / CB

Y PB PR

The DPS-10.5’s HD VIDEO OUT COMPO-

 

Y

Y

 

NENT sockets are BNC connectors.

 

 

 

S-Video

 

 

S VIDEO

S-Video connections provide better picture

 

 

 

quality than composite video.

 

 

 

 

 

 

 

VIDEO

Composite video is commonly used on TVs,

Composite video

 

 

VCRs, and other video equipment. Use only

 

 

 

 

 

 

 

dedicated composite video cables.

23

Image 23
Contents DPS-10.5 Important Safety Instructions For U.S. model PrecautionsIf in any doubt, consult a qualified electrician PrecautionsFor models having a power cord with a polarized plug Moisture condensation may damage this unit Never Touch this Unit with Wet HandsContents Specifications Important Safety Instructions PrecautionsInitial Setup Basic Playback Configuring the DPS-10.5Introduction DPS-10.5 FeaturesCable Supplied AccessoriesPower-plug adapter IntroductionDVD-Video Regions Unsupported DVD FeaturesDisc Notes Supported DiscsFunction Support Disc Content OrganizationVideo CDs MP3 & Jpeg CompatibilityCopyright Cleaning DiscsHandling Discs Storing DiscsJpeg Joint Photographic Experts Group TerminologyHdmi High Definition Multimedia Interface Vlsc Vector Linear Shaping Circuitry MPEG1 Moving Picture Experts GroupCompressed digital video format used for VCDs MPEG2 Moving Picture Experts GroupBefore Use Installing the Remote’s BatteriesUsing the Remote Controller Front Panel Getting to Know the DPS-10.5Display Getting to Know the DPS-10.5Rear Panel MIX Audio OUT 27, 28 Surr Mode Audio OUT switchSupplied power cord should be connected here IR IN/OUTControlling the DPS-10.5 DVD Mode Remote ControllerPause button Setup buttonResolution button Previous/NextControlling an Integra AV Receiver Amp Mode Optical Digital Outputs ConnectingAV Cables & Connectors Before Making Any ConnectionsVideo Formats & DPS-10.5 Inputs & Outputs ConnectingDPS-10.5 audio output Disc type Audio format Audio Formats & DPS-10.5 OutputsVideo Output Connections Getting ConnectedUsing Composite Video Connecting a Standard TVUsing Component Video Using S-Video What is HDMI? Connecting an Hdtv or ProjectorConnecting a Component with an Hdmi Input Audio Formats Using HdmiHdmi & the DPS-10.5 VideoAV receiver Connecting an AV Receiver’s video InputsUsing Component Video Using i.LINK Connecting i.LINK-compatible ComponentsWhat is i.LINK? What is i.LINK Audio?Link cables Connecting to an AV Receiver’s Audio InputsConnecting Several i.LINK Components Digital Audio Connection Dolby Digital & DTSAnalog Audio Connection Dolby Digital, DTS, DVD-Audio & Sacd Stereo amp Digital ConnectionAnalog Connection Only one connectionSatellite/cable tuner, etc About the HD Component Video OUTCompatibility of this unit with progressive-scan TVs Integra AV receiver Connecting Components withControlling the DPS-10.5 When It’s Out of Range Controlling Components That Are Out of RangeControlling Other Out-of-range Components Connecting the Power CordPress the Standby/On button Turning On the DPS-10.5 with the Remote ControllerPress the DVD Mode button to select DVD mode Turning On the DPS-10.5Then press Enter Initial SetupFirst Time Setup Use the Up and DownInitial Setup Loading Discs Basic PlaybackPause To pause playback, press Starting, Pausing & Stopping PlaybackBasic Playback Start To start playback, press the Play ButtonPlay the menu Navigating Disc MenusLoad a DVD-Video disc or VCD Pressing the Top Menu buttonLoad a DVD-Video disc Selecting Chapters & Titles by NumberUse the number buttons to spec Ify a chapter or title numberSelecting Tracks by Number Frame-by-Frame Playback Fast Forward & ReverseSlow-motion Playback Adjusting the Display BrightnessNavigating MP3 Discs Viewing a Slideshow of Jpeg Images Making a Playlist with the Disc Navigator To stop the playlist, press To start the playlist, select anyItem in the Track list except Top folder and press the PlayTime Search Advanced PlaybackZooming Repeat Playback Advanced PlaybackOff To cancel random playback, use the Random button to selectRandom Playback Load a discItems to the Memory List Remote controller the Play buttonMemory Playback Press the Enter buttonDeleting Items from the Memory List Inserting New Items into the Memory ListChanging Items in the Memory List Selecting Camera AnglesSelecting Soundtracks Selecting SubtitlesDisplaying Information Last Memory3rd press Condition Onscreen DPS-10.5 Display Normal1st press 2nd press1st pressb VCD & CD4th press Condition Onscreen DPS-10.5 DisplayTurning Off the Video Circuits Setting the Hdmi Output ResolutionSelecting the Video Input Source Remote controller The Picture Control menu appears Using the Picture Control MenuSetting the Picture’s Aspect Ratio Press the remote controller’sLanguage Menu Setting Description PictureConfiguring the DPS-10.5 Operation Menu Setting Description DisplayConfiguring the DPS-10.5 Using the Onscreen Setup Menus Arrow button Following diagram showsConfiguring theDPS Blank screenTV Shape Interlaced SettingPicture Menu Progressive Setting Selecting the Interlaced SettingDigital Out/Digital1 i.LINK PAL Output Setting Australian model onlyAudio Menu Digital 2 Audio OUTs are on Link Output SettingDigital Out/Digital2 Hdmi Linear PCM OutChannel Multi Channel defaultTest tone is used to adjust the level of each speaker see Analog Audio OutSetting the Speaker Settings Buttons to select an option Setting the Speaker DistancesSmall default Select if the surround speakers are small Setup button to exit setup, orButtons to select Test Tone, Setting Levels With the Test ToneAV Synchronization Selecting the AV SynchronizationRemote controller The settings are stored Sacd Audio SetupCD Audio Setup Buttons to set the delay timeAudio Language Language MenuOn-Screen Language Disc Menu LanguageOperation Menu Display MenuSelect Parental Lock-On, Remote controller The Security Code box appearsParental Lock Remote ConfirmationSelecting Other Languages Initial Setup MenuPriority Contents Auto power offLanguage Code Language Code ListUse this list when specifying other languages Controlling Other Components Entering Remote Control CodesControlling Other Components Remote Control CodesRCA Noblex Controlling a VCR Press the TV Mode buttonPress the VCR Mode button Controlling a TVMode Learning the Commands of Other Remote ControllersDeleting the Learnt Commands of All Modes Deleting the Learnt Commands of One ModeSymptom Possible cause Remedy TroubleshootingAbnormal Behavior TroubleshootingRestoring the Default Settings Specifications Specifications and features subject to change without notice3 4 3 6 5